MySQL5.6 Error Message

Error number: 1000; Symbol: ER_HASHCHK; SQLSTATE: HY000
Message: hashchk
Unused.
Error number: 1001; Symbol: ER_NISAMCHK; SQLSTATE: HY000
Message: isamchk
Unused.
Error number: 1002; Symbol: ER_NO; SQLSTATE: HY000
Message: NO
Used in the construction of other messages.
Error number: 1003; Symbol: ER_YES; SQLSTATE: HY000
Message: YES
Used in the construction of other messages.
Extended EXPLAIN format generates Note messages. ER_YES is used in the Code column for these messages in subsequent SHOW WARNINGS output.
Error number: 1004; Symbol: ER_CANT_CREATE_FILE; SQLSTATE: HY000
Message: Can't create file '%s' (errno: %d - %s)
Occurs for failure to create or copy a file needed for some operation.
Possible causes: Permissions problem for source file; destination file already exists but is not writeable.
Error number: 1005; Symbol: ER_CANT_CREATE_TABLE; SQLSTATE: HY000
Message: Can't create table '%s' (errno: %d)
InnoDB reports this error when a table cannot be created. If the error message refers to error 150, table creation failed because a foreign key constraint was not correctly formed. If the error message refers to error −1, table creation probably failed because the table includes a column name that matched the name of an internal InnoDB table.
Error number: 1006; Symbol: ER_CANT_CREATE_DB; SQLSTATE: HY000
Message: Can't create database '%s' (errno: %d)
Error number: 1007; Symbol: ER_DB_CREATE_EXISTS; SQLSTATE: HY000
Message: Can't create database '%s'; database exists
An attempt to create a database failed because the database already exists.
Drop the database first if you really want to replace an existing database, or add an IF NOT EXISTS clause to the CREATE DATABASE statement if to retain an existing database without having the statement produce an error.
Error number: 1008; Symbol: ER_DB_DROP_EXISTS; SQLSTATE: HY000
Message: Can't drop database '%s'; database doesn't exist
Error number: 1009; Symbol: ER_DB_DROP_DELETE; SQLSTATE: HY000
Message: Error dropping database (can't delete '%s', errno: %d)
Error number: 1010; Symbol: ER_DB_DROP_RMDIR; SQLSTATE: HY000
Message: Error dropping database (can't rmdir '%s', errno: %d)
Error number: 1011; Symbol: ER_CANT_DELETE_FILE; SQLSTATE: HY000
Message: Error on delete of '%s' (errno: %d - %s)
Error number: 1012; Symbol: ER_CANT_FIND_SYSTEM_REC; SQLSTATE: HY000
Message: Can't read record in system table
Returned by InnoDB for attempts to access InnoDB INFORMATION_SCHEMA tables when InnoDB is unavailable.
Error number: 1013; Symbol: ER_CANT_GET_STAT; SQLSTATE: HY000
Message: Can't get status of '%s' (errno: %d - %s)
Error number: 1014; Symbol: ER_CANT_GET_WD; SQLSTATE: HY000
Message: Can't get working directory (errno: %d - %s)
Error number: 1015; Symbol: ER_CANT_LOCK; SQLSTATE: HY000
Message: Can't lock file (errno: %d - %s)
Error number: 1016; Symbol: ER_CANT_OPEN_FILE; SQLSTATE: HY000
Message: Can't open file: '%s' (errno: %d - %s)
InnoDB reports this error when the table from the InnoDB data files cannot be found, even though the .frm file for the table exists. See Troubleshooting InnoDB Data Dictionary Operations.
Error number: 1017; Symbol: ER_FILE_NOT_FOUND; SQLSTATE: HY000
Message: Can't find file: '%s' (errno: %d - %s)
Error number: 1018; Symbol: ER_CANT_READ_DIR; SQLSTATE: HY000
Message: Can't read dir of '%s' (errno: %d - %s)
Error number: 1019; Symbol: ER_CANT_SET_WD; SQLSTATE: HY000
Message: Can't change dir to '%s' (errno: %d - %s)
Error number: 1020; Symbol: ER_CHECKREAD; SQLSTATE: HY000
Message: Record has changed since last read in table '%s'
Error number: 1021; Symbol: ER_DISK_FULL; SQLSTATE: HY000
Message: Disk full (%s); waiting for someone to free some space... (errno: %d - %s)
Error number: 1022; Symbol: ER_DUP_KEY; SQLSTATE: 23000
Message: Can't write; duplicate key in table '%s'
Error number: 1023; Symbol: ER_ERROR_ON_CLOSE; SQLSTATE: HY000
Message: Error on close of '%s' (errno: %d - %s)
Error number: 1024; Symbol: ER_ERROR_ON_READ; SQLSTATE: HY000
Message: Error reading file '%s' (errno: %d - %s)
Error number: 1025; Symbol: ER_ERROR_ON_RENAME; SQLSTATE: HY000
Message: Error on rename of '%s' to '%s' (errno: %d - %s)
Error number: 1026; Symbol: ER_ERROR_ON_WRITE; SQLSTATE: HY000
Message: Error writing file '%s' (errno: %d - %s)
Error number: 1027; Symbol: ER_FILE_USED; SQLSTATE: HY000
Message: '%s' is locked against change
Error number: 1028; Symbol: ER_FILSORT_ABORT; SQLSTATE: HY000
Message: Sort aborted
Error number: 1029; Symbol: ER_FORM_NOT_FOUND; SQLSTATE: HY000
Message: View '%s' doesn't exist for '%s'
Error number: 1030; Symbol: ER_GET_ERRNO; SQLSTATE: HY000
Message: Got error %d from storage engine
Check the %d value to see what the OS error means. For example, 28 indicates that you have run out of disk space.
Error number: 1031; Symbol: ER_ILLEGAL_HA; SQLSTATE: HY000
Message: Table storage engine for '%s' doesn't have this option
Error number: 1032; Symbol: ER_KEY_NOT_FOUND; SQLSTATE: HY000
Message: Can't find record in '%s'
Error number: 1033; Symbol: ER_NOT_FORM_FILE; SQLSTATE: HY000
Message: Incorrect information in file: '%s'
Error number: 1034; Symbol: ER_NOT_KEYFILE; SQLSTATE: HY000
Message: Incorrect key file for table '%s'; try to repair it
Error number: 1035; Symbol: ER_OLD_KEYFILE; SQLSTATE: HY000
Message: Old key file for table '%s'; repair it!
Error number: 1036; Symbol: ER_OPEN_AS_READONLY; SQLSTATE: HY000
Message: Table '%s' is read only
Error number: 1037; Symbol: ER_OUTOFMEMORY; SQLSTATE: HY001
Message: Out of memory; restart server and try again (needed %d bytes)
Error number: 1038; Symbol: ER_OUT_OF_SORTMEMORY; SQLSTATE: HY001
Message: Out of sort memory, consider increasing server sort buffer size
Error number: 1039; Symbol: ER_UNEXPECTED_EOF; SQLSTATE: HY000
Message: Unexpected EOF found when reading file '%s' (errno: %d - %s)
Error number: 1040; Symbol: ER_CON_COUNT_ERROR; SQLSTATE: 08004
Message: Too many connections
Error number: 1041; Symbol: ER_OUT_OF_RESOURCES; SQLSTATE: HY000
Message: Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space
Error number: 1042; Symbol: ER_BAD_HOST_ERROR; SQLSTATE: 08S01
Message: Can't get hostname for your address
Error number: 1043; Symbol: ER_HANDSHAKE_ERROR; SQLSTATE: 08S01
Message: Bad handshake
Error number: 1044; Symbol: ER_DBACCESS_DENIED_ERROR; SQLSTATE: 42000
Message: Access denied for user '%s'@'%s' to database '%s'
Error number: 1045; Symbol: ER_ACCESS_DENIED_ERROR; SQLSTATE: 28000
Message: Access denied for user '%s'@'%s' (using password: %s)
Error number: 1046; Symbol: ER_NO_DB_ERROR; SQLSTATE: 3D000
Message: No database selected
Error number: 1047; Symbol: ER_UNKNOWN_COM_ERROR; SQLSTATE: 08S01
Message: Unknown command
Error number: 1048; Symbol: ER_BAD_NULL_ERROR; SQLSTATE: 23000
Message: Column '%s' cannot be null
Error number: 1049; Symbol: ER_BAD_DB_ERROR; SQLSTATE: 42000
Message: Unknown database '%s'
Error number: 1050; Symbol: ER_TABLE_EXISTS_ERROR; SQLSTATE: 42S01
Message: Table '%s' already exists
Error number: 1051; Symbol: ER_BAD_TABLE_ERROR; SQLSTATE: 42S02
Message: Unknown table '%s'
Error number: 1052; Symbol: ER_NON_UNIQ_ERROR; SQLSTATE: 23000
Message: Column '%s' in %s is ambiguous
%s = column name
%s = location of column (for example, "field list")
Likely cause: A column appears in a query without appropriate qualification, such as in a select list or ON clause.
Examples:
mysql> SELECT i FROM t INNER JOIN t AS t2;
ERROR 1052 (23000): Column 'i' in field list is ambiguous
mysql> SELECT * FROM t LEFT JOIN t AS t2 ON i = i;
ERROR 1052 (23000): Column 'i' in on clause is ambiguous
Resolution:
Qualify the column with the appropriate table name:
mysql> SELECT t2.i FROM t INNER JOIN t AS t2;
Modify the query to avoid the need for qualification:
mysql> SELECT * FROM t LEFT JOIN t AS t2 USING (i);
Error number: 1053; Symbol: ER_SERVER_SHUTDOWN; SQLSTATE: 08S01
Message: Server shutdown in progress
Error number: 1054; Symbol: ER_BAD_FIELD_ERROR; SQLSTATE: 42S22
Message: Unknown column '%s' in '%s'
Error number: 1055; Symbol: ER_WRONG_FIELD_WITH_GROUP; SQLSTATE: 42000
Message: '%s' isn't in GROUP BY
Error number: 1056; Symbol: ER_WRONG_GROUP_FIELD; SQLSTATE: 42000
Message: Can't group on '%s'
Error number: 1057; Symbol: ER_WRONG_SUM_SELECT; SQLSTATE: 42000
Message: Statement has sum functions and columns in same statement
Error number: 1058; Symbol: ER_WRONG_VALUE_COUNT; SQLSTATE: 21S01
Message: Column count doesn't match value count
Error number: 1059; Symbol: ER_TOO_LONG_IDENT; SQLSTATE: 42000
Message: Identifier name '%s' is too long
Error number: 1060; Symbol: ER_DUP_FIELDNAME; SQLSTATE: 42S21
Message: Duplicate column name '%s'
Error number: 1061; Symbol: ER_DUP_KEYNAME; SQLSTATE: 42000
Message: Duplicate key name '%s'
Error number: 1062; Symbol: ER_DUP_ENTRY; SQLSTATE: 23000
Message: Duplicate entry '%s' for key %d
The message returned with this error uses the format string for ER_DUP_ENTRY_WITH_KEY_NAME.
Error number: 1063; Symbol: ER_WRONG_FIELD_SPEC; SQLSTATE: 42000
Message: Incorrect column specifier for column '%s'
Error number: 1064; Symbol: ER_PARSE_ERROR; SQLSTATE: 42000
Message: %s near '%s' at line %d
Error number: 1065; Symbol: ER_EMPTY_QUERY; SQLSTATE: 42000
Message: Query was empty
Error number: 1066; Symbol: ER_NONUNIQ_TABLE; SQLSTATE: 42000
Message: Not unique table/alias: '%s'
Error number: 1067; Symbol: ER_INVALID_DEFAULT; SQLSTATE: 42000
Message: Invalid default value for '%s'
Error number: 1068; Symbol: ER_MULTIPLE_PRI_KEY; SQLSTATE: 42000
Message: Multiple primary key defined
Error number: 1069; Symbol: ER_TOO_MANY_KEYS; SQLSTATE: 42000
Message: Too many keys specified; max %d keys allowed
Error number: 1070; Symbol: ER_TOO_MANY_KEY_PARTS; SQLSTATE: 42000
Message: Too many key parts specified; max %d parts allowed
Error number: 1071; Symbol: ER_TOO_LONG_KEY; SQLSTATE: 42000
Message: Specified key was too long; max key length is %d bytes
Error number: 1072; Symbol: ER_KEY_COLUMN_DOES_NOT_EXITS; SQLSTATE: 42000
Message: Key column '%s' doesn't exist in table
Error number: 1073; Symbol: ER_BLOB_USED_AS_KEY; SQLSTATE: 42000
Message: BLOB column '%s' can't be used in key specification with the used table type
Error number: 1074; Symbol: ER_TOO_BIG_FIELDLENGTH; SQLSTATE: 42000
Message: Column length too big for column '%s' (max = %lu); use BLOB or TEXT instead
Error number: 1075; Symbol: ER_WRONG_AUTO_KEY; SQLSTATE: 42000
Message: Incorrect table definition; there can be only one auto column and it must be defined as a key
Error number: 1076; Symbol: ER_READY; SQLSTATE: HY000
Message: %s: ready for connections. Version: '%s' socket: '%s' port: %d
Error number: 1077; Symbol: ER_NORMAL_SHUTDOWN; SQLSTATE: HY000
Message: %s: Normal shutdown
Error number: 1078; Symbol: ER_GOT_SIGNAL; SQLSTATE: HY000
Message: %s: Got signal %d. Aborting!
Error number: 1079; Symbol: ER_SHUTDOWN_COMPLETE; SQLSTATE: HY000
Message: %s: Shutdown complete
Error number: 1080; Symbol: ER_FORCING_CLOSE; SQLSTATE: 08S01
Message: %s: Forcing close of thread %ld user: '%s'
Error number: 1081; Symbol: ER_IPSOCK_ERROR; SQLSTATE: 08S01
Message: Can't create IP socket
Error number: 1082; Symbol: ER_NO_SUCH_INDEX; SQLSTATE: 42S12
Message: Table '%s' has no index like the one used in CREATE INDEX; recreate the table
Error number: 1083; Symbol: ER_WRONG_FIELD_TERMINATORS; SQLSTATE: 42000
Message: Field separator argument is not what is expected; check the manual
Error number: 1084; Symbol: ER_BLOBS_AND_NO_TERMINATED; SQLSTATE: 42000
Message: You can't use fixed rowlength with BLOBs; please use 'fields terminated by'
Error number: 1085; Symbol: ER_TEXTFILE_NOT_READABLE; SQLSTATE: HY000
Message: The file '%s' must be in the database directory or be readable by all
Error number: 1086; Symbol: ER_FILE_EXISTS_ERROR; SQLSTATE: HY000
Message: File '%s' already exists
Error number: 1087; Symbol: ER_LOAD_INFO; SQLSTATE: HY000
Message: Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld
Error number: 1088; Symbol: ER_ALTER_INFO; SQLSTATE: HY000
Message: Records: %ld Duplicates: %ld
Error number: 1089; Symbol: ER_WRONG_SUB_KEY; SQLSTATE: HY000
Message: Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique prefix keys
Error number: 1090; Symbol: ER_CANT_REMOVE_ALL_FIELDS; SQLSTATE: 42000
Message: You can't delete all columns with ALTER TABLE; use DROP TABLE instead
Error number: 1091; Symbol: ER_CANT_DROP_FIELD_OR_KEY; SQLSTATE: 42000
Message: Can't DROP '%s'; check that column/key exists
Error number: 1092; Symbol: ER_INSERT_INFO; SQLSTATE: HY000
Message: Records: %ld Duplicates: %ld Warnings: %ld
Error number: 1093; Symbol: ER_UPDATE_TABLE_USED; SQLSTATE: HY000
Message: You can't specify target table '%s' for update in FROM clause
This error occurs for attempts to select from and modify the same table within a single statement. See Restrictions on Subqueries.
Error number: 1094; Symbol: ER_NO_SUCH_THREAD; SQLSTATE: HY000
Message: Unknown thread id: %lu
Error number: 1095; Symbol: ER_KILL_DENIED_ERROR; SQLSTATE: HY000
Message: You are not owner of thread %lu
Error number: 1096; Symbol: ER_NO_TABLES_USED; SQLSTATE: HY000
Message: No tables used
Error number: 1097; Symbol: ER_TOO_BIG_SET; SQLSTATE: HY000
Message: Too many strings for column %s and SET
Error number: 1098; Symbol: ER_NO_UNIQUE_LOGFILE; SQLSTATE: HY000
Message: Can't generate a unique log-filename %s.(1-999)
Error number: 1099; Symbol: ER_TABLE_NOT_LOCKED_FOR_WRITE; SQLSTATE: HY000
Message: Table '%s' was locked with a READ lock and can't be updated
Error number: 1100; Symbol: ER_TABLE_NOT_LOCKED; SQLSTATE: HY000
Message: Table '%s' was not locked with LOCK TABLES
Error number: 1101; Symbol: ER_BLOB_CANT_HAVE_DEFAULT; SQLSTATE: 42000
Message: BLOB/TEXT column '%s' can't have a default value
Error number: 1102; Symbol: ER_WRONG_DB_NAME; SQLSTATE: 42000
Message: Incorrect database name '%s'
Error number: 1103; Symbol: ER_WRONG_TABLE_NAME; SQLSTATE: 42000
Message: Incorrect table name '%s'
Error number: 1104; Symbol: ER_TOO_BIG_SELECT; SQLSTATE: 42000
Message: The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay
Error number: 1105; Symbol: ER_UNKNOWN_ERROR; SQLSTATE: HY000
Message: Unknown error
Error number: 1106; Symbol: ER_UNKNOWN_PROCEDURE; SQLSTATE: 42000
Message: Unknown procedure '%s'
Error number: 1107; Symbol: ER_WRONG_PARAMCOUNT_TO_PROCEDURE; SQLSTATE: 42000
Message: Incorrect parameter count to procedure '%s'
Error number: 1108; Symbol: ER_WRONG_PARAMETERS_TO_PROCEDURE; SQLSTATE: HY000
Message: Incorrect parameters to procedure '%s'
Error number: 1109; Symbol: ER_UNKNOWN_TABLE; SQLSTATE: 42S02
Message: Unknown table '%s' in %s
Error number: 1110; Symbol: ER_FIELD_SPECIFIED_TWICE; SQLSTATE: 42000
Message: Column '%s' specified twice
Error number: 1111; Symbol: ER_INVALID_GROUP_FUNC_USE; SQLSTATE: HY000
Message: Invalid use of group function
Error number: 1112; Symbol: ER_UNSUPPORTED_EXTENSION; SQLSTATE: 42000
Message: Table '%s' uses an extension that doesn't exist in this MySQL version
Error number: 1113; Symbol: ER_TABLE_MUST_HAVE_COLUMNS; SQLSTATE: 42000
Message: A table must have at least 1 column
Error number: 1114; Symbol: ER_RECORD_FILE_FULL; SQLSTATE: HY000
Message: The table '%s' is full
InnoDB reports this error when the system tablespace runs out of free space. Reconfigure the system tablespace to add a new data file.
Error number: 1115; Symbol: ER_UNKNOWN_CHARACTER_SET; SQLSTATE: 42000
Message: Unknown character set: '%s'
Error number: 1116; Symbol: ER_TOO_MANY_TABLES; SQLSTATE: HY000
Message: Too many tables; MySQL can only use %d tables in a join
Error number: 1117; Symbol: ER_TOO_MANY_FIELDS; SQLSTATE: HY000
Message: Too many columns
Error number: 1118; Symbol: ER_TOO_BIG_ROWSIZE; SQLSTATE: 42000
Message: Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs
Error number: 1119; Symbol: ER_STACK_OVERRUN; SQLSTATE: HY000
Message: Thread stack overrun: Used: %ld of a %ld stack. Use 'mysqld --thread_stack=#' to specify a bigger stack if needed
Error number: 1120; Symbol: ER_WRONG_OUTER_JOIN; SQLSTATE: 42000
Message: Cross dependency found in OUTER JOIN; examine your ON conditions
Error number: 1121; Symbol: ER_NULL_COLUMN_IN_INDEX; SQLSTATE: 42000
Message: Table handler doesn't support NULL in given index. Please change column '%s' to be NOT NULL or use another handler
Error number: 1122; Symbol: ER_CANT_FIND_UDF; SQLSTATE: HY000
Message: Can't load function '%s'
Error number: 1123; Symbol: ER_CANT_INITIALIZE_UDF; SQLSTATE: HY000
Message: Can't initialize function '%s'; %s
Error number: 1124; Symbol: ER_UDF_NO_PATHS; SQLSTATE: HY000
Message: No paths allowed for shared library
Error number: 1125; Symbol: ER_UDF_EXISTS; SQLSTATE: HY000
Message: Function '%s' already exists
Error number: 1126; Symbol: ER_CANT_OPEN_LIBRARY; SQLSTATE: HY000
Message: Can't open shared library '%s' (errno: %d %s)
Error number: 1127; Symbol: ER_CANT_FIND_DL_ENTRY; SQLSTATE: HY000
Message: Can't find symbol '%s' in library
Error number: 1128; Symbol: ER_FUNCTION_NOT_DEFINED; SQLSTATE: HY000
Message: Function '%s' is not defined
Error number: 1129; Symbol: ER_HOST_IS_BLOCKED; SQLSTATE: HY000
Message: Host '%s' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
Error number: 1130; Symbol: ER_HOST_NOT_PRIVILEGED; SQLSTATE: HY000
Message: Host '%s' is not allowed to connect to this MySQL server
Error number: 1131; Symbol: ER_PASSWORD_ANONYMOUS_USER; SQLSTATE: 42000
Message: You are using MySQL as an anonymous user and anonymous users are not allowed to change passwords
Error number: 1132; Symbol: ER_PASSWORD_NOT_ALLOWED; SQLSTATE: 42000
Message: You must have privileges to update tables in the mysql database to be able to change passwords for others
Error number: 1133; Symbol: ER_PASSWORD_NO_MATCH; SQLSTATE: 42000
Message: Can't find any matching row in the user table
Error number: 1134; Symbol: ER_UPDATE_INFO; SQLSTATE: HY000
Message: Rows matched: %ld Changed: %ld Warnings: %ld
Error number: 1135; Symbol: ER_CANT_CREATE_THREAD; SQLSTATE: HY000
Message: Can't create a new thread (errno %d); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug
Error number: 1136; Symbol: ER_WRONG_VALUE_COUNT_ON_ROW; SQLSTATE: 21S01
Message: Column count doesn't match value count at row %ld
Error number: 1137; Symbol: ER_CANT_REOPEN_TABLE; SQLSTATE: HY000
Message: Can't reopen table: '%s'
Error number: 1138; Symbol: ER_INVALID_USE_OF_NULL; SQLSTATE: 22004
Message: Invalid use of NULL value
Error number: 1139; Symbol: ER_REGEXP_ERROR; SQLSTATE: 42000
Message: Got error '%s' from regexp
Error number: 1140; Symbol: ER_MIX_OF_GROUP_FUNC_AND_FIELDS; SQLSTATE: 42000
Message: Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause
Error number: 1141; Symbol: ER_NONEXISTING_GRANT; SQLSTATE: 42000
Message: There is no such grant defined for user '%s' on host '%s'
Error number: 1142; Symbol: ER_TABLEACCESS_DENIED_ERROR; SQLSTATE: 42000
Message: %s command denied to user '%s'@'%s' for table '%s'
Error number: 1143; Symbol: ER_COLUMNACCESS_DENIED_ERROR; SQLSTATE: 42000
Message: %s command denied to user '%s'@'%s' for column '%s' in table '%s'
Error number: 1144; Symbol: ER_ILLEGAL_GRANT_FOR_TABLE; SQLSTATE: 42000
Message: Illegal GRANT/REVOKE command; please consult the manual to see which privileges can be used
Error number: 1145; Symbol: ER_GRANT_WRONG_HOST_OR_USER; SQLSTATE: 42000
Message: The host or user argument to GRANT is too long
Error number: 1146; Symbol: ER_NO_SUCH_TABLE; SQLSTATE: 42S02
Message: Table '%s.%s' doesn't exist
Error number: 1147; Symbol: ER_NONEXISTING_TABLE_GRANT; SQLSTATE: 42000
Message: There is no such grant defined for user '%s' on host '%s' on table '%s'
Error number: 1148; Symbol: ER_NOT_ALLOWED_COMMAND; SQLSTATE: 42000
Message: The used command is not allowed with this MySQL version
Error number: 1149; Symbol: ER_SYNTAX_ERROR; SQLSTATE: 42000
Message: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use
Error number: 1150; Symbol: ER_DELAYED_CANT_CHANGE_LOCK; SQLSTATE: HY000
Message: Delayed insert thread couldn't get requested lock for table %s
Error number: 1151; Symbol: ER_TOO_MANY_DELAYED_THREADS; SQLSTATE: HY000
Message: Too many delayed threads in use
Error number: 1152; Symbol: ER_ABORTING_CONNECTION; SQLSTATE: 08S01
Message: Aborted connection %ld to db: '%s' user: '%s' (%s)
Error number: 1153; Symbol: ER_NET_PACKET_TOO_LARGE; SQLSTATE: 08S01
Message: Got a packet bigger than 'max_allowed_packet' bytes
Error number: 1154; Symbol: ER_NET_READ_ERROR_FROM_PIPE; SQLSTATE: 08S01
Message: Got a read error from the connection pipe
Error number: 1155; Symbol: ER_NET_FCNTL_ERROR; SQLSTATE: 08S01
Message: Got an error from fcntl()
Error number: 1156; Symbol: ER_NET_PACKETS_OUT_OF_ORDER; SQLSTATE: 08S01
Message: Got packets out of order
Error number: 1157; Symbol: ER_NET_UNCOMPRESS_ERROR; SQLSTATE: 08S01
Message: Couldn't uncompress communication packet
Error number: 1158; Symbol: ER_NET_READ_ERROR; SQLSTATE: 08S01
Message: Got an error reading communication packets
Error number: 1159; Symbol: ER_NET_READ_INTERRUPTED; SQLSTATE: 08S01
Message: Got timeout reading communication packets
Error number: 1160; Symbol: ER_NET_ERROR_ON_WRITE; SQLSTATE: 08S01
Message: Got an error writing communication packets
Error number: 1161; Symbol: ER_NET_WRITE_INTERRUPTED; SQLSTATE: 08S01
Message: Got timeout writing communication packets
Error number: 1162; Symbol: ER_TOO_LONG_STRING; SQLSTATE: 42000
Message: Result string is longer than 'max_allowed_packet' bytes
Error number: 1163; Symbol: ER_TABLE_CANT_HANDLE_BLOB; SQLSTATE: 42000
Message: The used table type doesn't support BLOB/TEXT columns
Error number: 1164; Symbol: ER_TABLE_CANT_HANDLE_AUTO_INCREMENT; SQLSTATE: 42000
Message: The used table type doesn't support AUTO_INCREMENT columns
Error number: 1165; Symbol: ER_DELAYED_INSERT_TABLE_LOCKED; SQLSTATE: HY000
Message: INSERT DELAYED can't be used with table '%s' because it is locked with LOCK TABLES
Error number: 1166; Symbol: ER_WRONG_COLUMN_NAME; SQLSTATE: 42000
Message: Incorrect column name '%s'
Error number: 1167; Symbol: ER_WRONG_KEY_COLUMN; SQLSTATE: 42000
Message: The used storage engine can't index column '%s'
Error number: 1168; Symbol: ER_WRONG_MRG_TABLE; SQLSTATE: HY000
Message: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
Error number: 1169; Symbol: ER_DUP_UNIQUE; SQLSTATE: 23000
Message: Can't write, because of unique constraint, to table '%s'
Error number: 1170; Symbol: ER_BLOB_KEY_WITHOUT_LENGTH; SQLSTATE: 42000
Message: BLOB/TEXT column '%s' used in key specification without a key length
Error number: 1171; Symbol: ER_PRIMARY_CANT_HAVE_NULL; SQLSTATE: 42000
Message: All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead
Error number: 1172; Symbol: ER_TOO_MANY_ROWS; SQLSTATE: 42000
Message: Result consisted of more than one row
Error number: 1173; Symbol: ER_REQUIRES_PRIMARY_KEY; SQLSTATE: 42000
Message: This table type requires a primary key
Error number: 1174; Symbol: ER_NO_RAID_COMPILED; SQLSTATE: HY000
Message: This version of MySQL is not compiled with RAID support
Error number: 1175; Symbol: ER_UPDATE_WITHOUT_KEY_IN_SAFE_MODE; SQLSTATE: HY000
Message: You are using safe update mode and you tried to update a table without a WHERE that uses a KEY column
Error number: 1176; Symbol: ER_KEY_DOES_NOT_EXITS; SQLSTATE: 42000
Message: Key '%s' doesn't exist in table '%s'
Error number: 1177; Symbol: ER_CHECK_NO_SUCH_TABLE; SQLSTATE: 42000
Message: Can't open table
Error number: 1178; Symbol: ER_CHECK_NOT_IMPLEMENTED; SQLSTATE: 42000
Message: The storage engine for the table doesn't support %s
Error number: 1179; Symbol: ER_CANT_DO_THIS_DURING_AN_TRANSACTION; SQLSTATE: 25000
Message: You are not allowed to execute this command in a transaction
Error number: 1180; Symbol: ER_ERROR_DURING_COMMIT; SQLSTATE: HY000
Message: Got error %d during COMMIT
Error number: 1181; Symbol: ER_ERROR_DURING_ROLLBACK; SQLSTATE: HY000
Message: Got error %d during ROLLBACK
Error number: 1182; Symbol: ER_ERROR_DURING_FLUSH_LOGS; SQLSTATE: HY000
Message: Got error %d during FLUSH_LOGS
Error number: 1183; Symbol: ER_ERROR_DURING_CHECKPOINT; SQLSTATE: HY000
Message: Got error %d during CHECKPOINT
Error number: 1184; Symbol: ER_NEW_ABORTING_CONNECTION; SQLSTATE: 08S01
Message: Aborted connection %ld to db: '%s' user: '%s' host: '%s' (%s)
Error number: 1185; Symbol: ER_DUMP_NOT_IMPLEMENTED; SQLSTATE: HY000
Message: The storage engine for the table does not support binary table dump
Error number: 1186; Symbol: ER_FLUSH_MASTER_BINLOG_CLOSED; SQLSTATE: HY000
Message: Binlog closed, cannot RESET MASTER
Error number: 1187; Symbol: ER_INDEX_REBUILD; SQLSTATE: HY000
Message: Failed rebuilding the index of dumped table '%s'
Error number: 1188; Symbol: ER_MASTER; SQLSTATE: HY000
Message: Error from master: '%s'
Error number: 1189; Symbol: ER_MASTER_NET_READ; SQLSTATE: 08S01
Message: Net error reading from master
Error number: 1190; Symbol: ER_MASTER_NET_WRITE; SQLSTATE: 08S01
Message: Net error writing to master
Error number: 1191; Symbol: ER_FT_MATCHING_KEY_NOT_FOUND; SQLSTATE: HY000
Message: Can't find FULLTEXT index matching the column list
Error number: 1192; Symbol: ER_LOCK_OR_ACTIVE_TRANSACTION; SQLSTATE: HY000
Message: Can't execute the given command because you have active locked tables or an active transaction
Error number: 1193; Symbol: ER_UNKNOWN_SYSTEM_VARIABLE; SQLSTATE: HY000
Message: Unknown system variable '%s'
Error number: 1194; Symbol: ER_CRASHED_ON_USAGE; SQLSTATE: HY000
Message: Table '%s' is marked as crashed and should be repaired
Error number: 1195; Symbol: ER_CRASHED_ON_REPAIR; SQLSTATE: HY000
Message: Table '%s' is marked as crashed and last (automatic?) repair failed
Error number: 1196; Symbol: ER_WARNING_NOT_COMPLETE_ROLLBACK; SQLSTATE: HY000
Message: Some non-transactional changed tables couldn't be rolled back
Error number: 1197; Symbol: ER_TRANS_CACHE_FULL; SQLSTATE: HY000
Message: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
Error number: 1198; Symbol: ER_SLAVE_MUST_STOP; SQLSTATE: HY000
Message: This operation cannot be performed with a running slave; run STOP SLAVE first
Error number: 1199; Symbol: ER_SLAVE_NOT_RUNNING; SQLSTATE: HY000
Message: This operation requires a running slave; configure slave and do START SLAVE
Error number: 1200; Symbol: ER_BAD_SLAVE; SQLSTATE: HY000
Message: The server is not configured as slave; fix in config file or with CHANGE MASTER TO
Error number: 1201; Symbol: ER_MASTER_INFO; SQLSTATE: HY000
Message: Could not initialize master info structure; more error messages can be found in the MySQL error log
Error number: 1202; Symbol: ER_SLAVE_THREAD; SQLSTATE: HY000
Message: Could not create slave thread; check system resources
Error number: 1203; Symbol: ER_TOO_MANY_USER_CONNECTIONS; SQLSTATE: 42000
Message: User %s already has more than 'max_user_connections' active connections
Error number: 1204; Symbol: ER_SET_CONSTANTS_ONLY; SQLSTATE: HY000
Message: You may only use constant expressions with SET
Error number: 1205; Symbol: ER_LOCK_WAIT_TIMEOUT; SQLSTATE: HY000
Message: Lock wait timeout exceeded; try restarting transaction
InnoDB reports this error when lock wait timeout expires. The statement that waited too long was rolled back (not the entire transaction). You can increase the value of the innodb_lock_wait_timeout configuration option if SQL statements should wait longer for other transactions to complete, or decrease it if too many long-running transactions are causing locking problems and reducing concurrency on a busy system.
Error number: 1206; Symbol: ER_LOCK_TABLE_FULL; SQLSTATE: HY000
Message: The total number of locks exceeds the lock table size
InnoDB reports this error when the total number of locks exceeds the amount of memory devoted to managing locks. To avoid this error, increase the value of innodb_buffer_pool_size. Within an individual application, a workaround may be to break a large operation into smaller pieces. For example, if the error occurs for a large INSERT, perform several smaller INSERT operations.
Error number: 1207; Symbol: ER_READ_ONLY_TRANSACTION; SQLSTATE: 25000
Message: Update locks cannot be acquired during a READ UNCOMMITTED transaction
Error number: 1208; Symbol: ER_DROP_DB_WITH_READ_LOCK; SQLSTATE: HY000
Message: DROP DATABASE not allowed while thread is holding global read lock
Error number: 1209; Symbol: ER_CREATE_DB_WITH_READ_LOCK; SQLSTATE: HY000
Message: CREATE DATABASE not allowed while thread is holding global read lock
Error number: 1210; Symbol: ER_WRONG_ARGUMENTS; SQLSTATE: HY000
Message: Incorrect arguments to %s
Error number: 1211; Symbol: ER_NO_PERMISSION_TO_CREATE_USER; SQLSTATE: 42000
Message: '%s'@'%s' is not allowed to create new users
Error number: 1212; Symbol: ER_UNION_TABLES_IN_DIFFERENT_DIR; SQLSTATE: HY000
Message: Incorrect table definition; all MERGE tables must be in the same database
Error number: 1213; Symbol: ER_LOCK_DEADLOCK; SQLSTATE: 40001
Message: Deadlock found when trying to get lock; try restarting transaction
InnoDB reports this error when a transaction encounters a deadlock and is automatically rolled back so that your application can take corrective action. To recover from this error, run all the operations in this transaction again. A deadlock occurs when requests for locks arrive in inconsistent order between transactions. The transaction that was rolled back released all its locks, and the other transaction can now get all the locks it requested. Thus, when you re-run the transaction that was rolled back, it might have to wait for other transactions to complete, but typically the deadlock does not recur. If you encounter frequent deadlocks, make the sequence of locking operations (LOCK TABLES, SELECT ... FOR UPDATE, and so on) consistent between the different transactions or applications that experience the issue. See Deadlocks in InnoDB for details.
Error number: 1214; Symbol: ER_TABLE_CANT_HANDLE_FT; SQLSTATE: HY000
Message: The used table type doesn't support FULLTEXT indexes
Error number: 1215; Symbol: ER_CANNOT_ADD_FOREIGN; SQLSTATE: HY000
Message: Cannot add foreign key constraint
Error number: 1216; Symbol: ER_NO_REFERENCED_ROW; SQLSTATE: 23000
Message: Cannot add or update a child row: a foreign key constraint fails
InnoDB reports this error when you try to add a row but there is no parent row, and a foreign key constraint fails. Add the parent row first.
Error number: 1217; Symbol: ER_ROW_IS_REFERENCED; SQLSTATE: 23000
Message: Cannot delete or update a parent row: a foreign key constraint fails
InnoDB reports this error when you try to delete a parent row that has children, and a foreign key constraint fails. Delete the children first.
Error number: 1218; Symbol: ER_CONNECT_TO_MASTER; SQLSTATE: 08S01
Message: Error connecting to master: %s
Error number: 1219; Symbol: ER_QUERY_ON_MASTER; SQLSTATE: HY000
Message: Error running query on master: %s
Error number: 1220; Symbol: ER_ERROR_WHEN_EXECUTING_COMMAND; SQLSTATE: HY000
Message: Error when executing command %s: %s
Error number: 1221; Symbol: ER_WRONG_USAGE; SQLSTATE: HY000
Message: Incorrect usage of %s and %s
Error number: 1222; Symbol: ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT; SQLSTATE: 21000
Message: The used SELECT statements have a different number of columns
Error number: 1223; Symbol: ER_CANT_UPDATE_WITH_READLOCK; SQLSTATE: HY000
Message: Can't execute the query because you have a conflicting read lock
Error number: 1224; Symbol: ER_MIXING_NOT_ALLOWED; SQLSTATE: HY000
Message: Mixing of transactional and non-transactional tables is disabled
Error number: 1225; Symbol: ER_DUP_ARGUMENT; SQLSTATE: HY000
Message: Option '%s' used twice in statement
Error number: 1226; Symbol: ER_USER_LIMIT_REACHED; SQLSTATE: 42000
Message: User '%s' has exceeded the '%s' resource (current value: %ld)
Error number: 1227; Symbol: ER_SPECIFIC_ACCESS_DENIED_ERROR; SQLSTATE: 42000
Message: Access denied; you need (at least one of) the %s privilege(s) for this operation
Error number: 1228; Symbol: ER_LOCAL_VARIABLE; SQLSTATE: HY000
Message: Variable '%s' is a SESSION variable and can't be used with SET GLOBAL
Error number: 1229; Symbol: ER_GLOBAL_VARIABLE; SQLSTATE: HY000
Message: Variable '%s' is a GLOBAL variable and should be set with SET GLOBAL
Error number: 1230; Symbol: ER_NO_DEFAULT; SQLSTATE: 42000
Message: Variable '%s' doesn't have a default value
Error number: 1231; Symbol: ER_WRONG_VALUE_FOR_VAR; SQLSTATE: 42000
Message: Variable '%s' can't be set to the value of '%s'
Error number: 1232; Symbol: ER_WRONG_TYPE_FOR_VAR; SQLSTATE: 42000
Message: Incorrect argument type to variable '%s'
Error number: 1233; Symbol: ER_VAR_CANT_BE_READ; SQLSTATE: HY000
Message: Variable '%s' can only be set, not read
Error number: 1234; Symbol: ER_CANT_USE_OPTION_HERE; SQLSTATE: 42000
Message: Incorrect usage/placement of '%s'
Error number: 1235; Symbol: ER_NOT_SUPPORTED_YET; SQLSTATE: 42000
Message: This version of MySQL doesn't yet support '%s'
Error number: 1236; Symbol: ER_MASTER_FATAL_ERROR_READING_BINLOG; SQLSTATE: HY000
Message: Got fatal error %d from master when reading data from binary log: '%s'
Error number: 1237; Symbol: ER_SLAVE_IGNORED_TABLE; SQLSTATE: HY000
Message: Slave SQL thread ignored the query because of replicate-*-table rules
Error number: 1238; Symbol: ER_INCORRECT_GLOBAL_LOCAL_VAR; SQLSTATE: HY000
Message: Variable '%s' is a %s variable
Error number: 1239; Symbol: ER_WRONG_FK_DEF; SQLSTATE: 42000
Message: Incorrect foreign key definition for '%s': %s
Error number: 1240; Symbol: ER_KEY_REF_DO_NOT_MATCH_TABLE_REF; SQLSTATE: HY000
Message: Key reference and table reference don't match
Error number: 1241; Symbol: ER_OPERAND_COLUMNS; SQLSTATE: 21000
Message: Operand should contain %d column(s)
Error number: 1242; Symbol: ER_SUBQUERY_NO_1_ROW; SQLSTATE: 21000
Message: Subquery returns more than 1 row
Error number: 1243; Symbol: ER_UNKNOWN_STMT_HANDLER; SQLSTATE: HY000
Message: Unknown prepared statement handler (%.*s) given to %s
Error number: 1244; Symbol: ER_CORRUPT_HELP_DB; SQLSTATE: HY000
Message: Help database is corrupt or does not exist
Error number: 1245; Symbol: ER_CYCLIC_REFERENCE; SQLSTATE: HY000
Message: Cyclic reference on subqueries
Error number: 1246; Symbol: ER_AUTO_CONVERT; SQLSTATE: HY000
Message: Converting column '%s' from %s to %s
Error number: 1247; Symbol: ER_ILLEGAL_REFERENCE; SQLSTATE: 42S22
Message: Reference '%s' not supported (%s)
Error number: 1248; Symbol: ER_DERIVED_MUST_HAVE_ALIAS; SQLSTATE: 42000
Message: Every derived table must have its own alias
Error number: 1249; Symbol: ER_SELECT_REDUCED; SQLSTATE: 01000
Message: Select %u was reduced during optimization
Error number: 1250; Symbol: ER_TABLENAME_NOT_ALLOWED_HERE; SQLSTATE: 42000
Message: Table '%s' from one of the SELECTs cannot be used in %s
Error number: 1251; Symbol: ER_NOT_SUPPORTED_AUTH_MODE; SQLSTATE: 08004
Message: Client does not support authentication protocol requested by server; consider upgrading MySQL client
Error number: 1252; Symbol: ER_SPATIAL_CANT_HAVE_NULL; SQLSTATE: 42000
Message: All parts of a SPATIAL index must be NOT NULL
Error number: 1253; Symbol: ER_COLLATION_CHARSET_MISMATCH; SQLSTATE: 42000
Message: COLLATION '%s' is not valid for CHARACTER SET '%s'
Error number: 1254; Symbol: ER_SLAVE_WAS_RUNNING; SQLSTATE: HY000
Message: Slave is already running
Error number: 1255; Symbol: ER_SLAVE_WAS_NOT_RUNNING; SQLSTATE: HY000
Message: Slave already has been stopped
Error number: 1256; Symbol: ER_TOO_BIG_FOR_UNCOMPRESS; SQLSTATE: HY000
Message: Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)
Error number: 1257; Symbol: ER_ZLIB_Z_MEM_ERROR; SQLSTATE: HY000
Message: ZLIB: Not enough memory
Error number: 1258; Symbol: ER_ZLIB_Z_BUF_ERROR; SQLSTATE: HY000
Message: ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)
Error number: 1259; Symbol: ER_ZLIB_Z_DATA_ERROR; SQLSTATE: HY000
Message: ZLIB: Input data corrupted
Error number: 1260; Symbol: ER_CUT_VALUE_GROUP_CONCAT; SQLSTATE: HY000
Message: Row %u was cut by GROUP_CONCAT()
Error number: 1261; Symbol: ER_WARN_TOO_FEW_RECORDS; SQLSTATE: 01000
Message: Row %ld doesn't contain data for all columns
Error number: 1262; Symbol: ER_WARN_TOO_MANY_RECORDS; SQLSTATE: 01000
Message: Row %ld was truncated; it contained more data than there were input columns
Error number: 1263; Symbol: ER_WARN_NULL_TO_NOTNULL; SQLSTATE: 22004
Message: Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld
Error number: 1264; Symbol: ER_WARN_DATA_OUT_OF_RANGE; SQLSTATE: 22003
Message: Out of range value for column '%s' at row %ld
Error number: 1265; Symbol: WARN_DATA_TRUNCATED; SQLSTATE: 01000
Message: Data truncated for column '%s' at row %ld
Error number: 1266; Symbol: ER_WARN_USING_OTHER_HANDLER; SQLSTATE: HY000
Message: Using storage engine %s for table '%s'
Error number: 1267; Symbol: ER_CANT_AGGREGATE_2COLLATIONS; SQLSTATE: HY000
Message: Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'
Error number: 1268; Symbol: ER_DROP_USER; SQLSTATE: HY000
Message: Cannot drop one or more of the requested users
Error number: 1269; Symbol: ER_REVOKE_GRANTS; SQLSTATE: HY000
Message: Can't revoke all privileges for one or more of the requested users
Error number: 1270; Symbol: ER_CANT_AGGREGATE_3COLLATIONS; SQLSTATE: HY000
Message: Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'
Error number: 1271; Symbol: ER_CANT_AGGREGATE_NCOLLATIONS; SQLSTATE: HY000
Message: Illegal mix of collations for operation '%s'
Error number: 1272; Symbol: ER_VARIABLE_IS_NOT_STRUCT; SQLSTATE: HY000
Message: Variable '%s' is not a variable component (can't be used as XXXX.variable_name)
Error number: 1273; Symbol: ER_UNKNOWN_COLLATION; SQLSTATE: HY000
Message: Unknown collation: '%s'
Error number: 1274; Symbol: ER_SLAVE_IGNORED_SSL_PARAMS; SQLSTATE: HY000
Message: SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started
Error number: 1275; Symbol: ER_SERVER_IS_IN_SECURE_AUTH_MODE; SQLSTATE: HY000
Message: Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format
Error number: 1276; Symbol: ER_WARN_FIELD_RESOLVED; SQLSTATE: HY000
Message: Field or reference '%s%s%s%s%s' of SELECT #%d was resolved in SELECT #%d
Error number: 1277; Symbol: ER_BAD_SLAVE_UNTIL_COND; SQLSTATE: HY000
Message: Incorrect parameter or combination of parameters for START SLAVE UNTIL
Error number: 1278; Symbol: ER_MISSING_SKIP_SLAVE; SQLSTATE: HY000
Message: It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
Error number: 1279; Symbol: ER_UNTIL_COND_IGNORED; SQLSTATE: HY000
Message: SQL thread is not to be started so UNTIL options are ignored
Error number: 1280; Symbol: ER_WRONG_NAME_FOR_INDEX; SQLSTATE: 42000
Message: Incorrect index name '%s'
Error number: 1281; Symbol: ER_WRONG_NAME_FOR_CATALOG; SQLSTATE: 42000
Message: Incorrect catalog name '%s'
Error number: 1282; Symbol: ER_WARN_QC_RESIZE; SQLSTATE: HY000
Message: Query cache failed to set size %lu; new query cache size is %lu
Error number: 1283; Symbol: ER_BAD_FT_COLUMN; SQLSTATE: HY000
Message: Column '%s' cannot be part of FULLTEXT index
Error number: 1284; Symbol: ER_UNKNOWN_KEY_CACHE; SQLSTATE: HY000
Message: Unknown key cache '%s'
Error number: 1285; Symbol: ER_WARN_HOSTNAME_WONT_WORK; SQLSTATE: HY000
Message: MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work
Error number: 1286; Symbol: ER_UNKNOWN_STORAGE_ENGINE; SQLSTATE: 42000
Message: Unknown storage engine '%s'
Error number: 1287; Symbol: ER_WARN_DEPRECATED_SYNTAX; SQLSTATE: HY000
Message: '%s' is deprecated and will be removed in a future release. Please use %s instead
Error number: 1288; Symbol: ER_NON_UPDATABLE_TABLE; SQLSTATE: HY000
Message: The target table %s of the %s is not updatable
Error number: 1289; Symbol: ER_FEATURE_DISABLED; SQLSTATE: HY000
Message: The '%s' feature is disabled; you need MySQL built with '%s' to have it working
Error number: 1290; Symbol: ER_OPTION_PREVENTS_STATEMENT; SQLSTATE: HY000
Message: The MySQL server is running with the %s option so it cannot execute this statement
Error number: 1291; Symbol: ER_DUPLICATED_VALUE_IN_TYPE; SQLSTATE: HY000
Message: Column '%s' has duplicated value '%s' in %s
Error number: 1292; Symbol: ER_TRUNCATED_WRONG_VALUE; SQLSTATE: 22007
Message: Truncated incorrect %s value: '%s'
Error number: 1293; Symbol: ER_TOO_MUCH_AUTO_TIMESTAMP_COLS; SQLSTATE: HY000
Message: Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause
Error number: 1294; Symbol: ER_INVALID_ON_UPDATE; SQLSTATE: HY000
Message: Invalid ON UPDATE clause for '%s' column
Error number: 1295; Symbol: ER_UNSUPPORTED_PS; SQLSTATE: HY000
Message: This command is not supported in the prepared statement protocol yet
Error number: 1296; Symbol: ER_GET_ERRMSG; SQLSTATE: HY000
Message: Got error %d '%s' from %s
Error number: 1297; Symbol: ER_GET_TEMPORARY_ERRMSG; SQLSTATE: HY000
Message: Got temporary error %d '%s' from %s
Error number: 1298; Symbol: ER_UNKNOWN_TIME_ZONE; SQLSTATE: HY000
Message: Unknown or incorrect time zone: '%s'
Error number: 1299; Symbol: ER_WARN_INVALID_TIMESTAMP; SQLSTATE: HY000
Message: Invalid TIMESTAMP value in column '%s' at row %ld
Error number: 1300; Symbol: ER_INVALID_CHARACTER_STRING; SQLSTATE: HY000
Message: Invalid %s character string: '%s'
Error number: 1301; Symbol: ER_WARN_ALLOWED_PACKET_OVERFLOWED; SQLSTATE: HY000
Message: Result of %s() was larger than max_allowed_packet (%ld) - truncated
Error number: 1302; Symbol: ER_CONFLICTING_DECLARATIONS; SQLSTATE: HY000
Message: Conflicting declarations: '%s%s' and '%s%s'
Error number: 1303; Symbol: ER_SP_NO_RECURSIVE_CREATE; SQLSTATE: 2F003
Message: Can't create a %s from within another stored routine
Error number: 1304; Symbol: ER_SP_ALREADY_EXISTS; SQLSTATE: 42000
Message: %s %s already exists
Error number: 1305; Symbol: ER_SP_DOES_NOT_EXIST; SQLSTATE: 42000
Message: %s %s does not exist
Error number: 1306; Symbol: ER_SP_DROP_FAILED; SQLSTATE: HY000
Message: Failed to DROP %s %s
Error number: 1307; Symbol: ER_SP_STORE_FAILED; SQLSTATE: HY000
Message: Failed to CREATE %s %s
Error number: 1308; Symbol: ER_SP_LILABEL_MISMATCH; SQLSTATE: 42000
Message: %s with no matching label: %s
Error number: 1309; Symbol: ER_SP_LABEL_REDEFINE; SQLSTATE: 42000
Message: Redefining label %s
Error number: 1310; Symbol: ER_SP_LABEL_MISMATCH; SQLSTATE: 42000
Message: End-label %s without match
Error number: 1311; Symbol: ER_SP_UNINIT_VAR; SQLSTATE: 01000
Message: Referring to uninitialized variable %s
Error number: 1312; Symbol: ER_SP_BADSELECT; SQLSTATE: 0A000
Message: PROCEDURE %s can't return a result set in the given context
Error number: 1313; Symbol: ER_SP_BADRETURN; SQLSTATE: 42000
Message: RETURN is only allowed in a FUNCTION
Error number: 1314; Symbol: ER_SP_BADSTATEMENT; SQLSTATE: 0A000
Message: %s is not allowed in stored procedures
Error number: 1315; Symbol: ER_UPDATE_LOG_DEPRECATED_IGNORED; SQLSTATE: 42000
Message: The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been ignored.
Error number: 1316; Symbol: ER_UPDATE_LOG_DEPRECATED_TRANSLATED; SQLSTATE: 42000
Message: The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN.
Error number: 1317; Symbol: ER_QUERY_INTERRUPTED; SQLSTATE: 70100
Message: Query execution was interrupted
Error number: 1318; Symbol: ER_SP_WRONG_NO_OF_ARGS; SQLSTATE: 42000
Message: Incorrect number of arguments for %s %s; expected %u, got %u
Error number: 1319; Symbol: ER_SP_COND_MISMATCH; SQLSTATE: 42000
Message: Undefined CONDITION: %s
Error number: 1320; Symbol: ER_SP_NORETURN; SQLSTATE: 42000
Message: No RETURN found in FUNCTION %s
Error number: 1321; Symbol: ER_SP_NORETURNEND; SQLSTATE: 2F005
Message: FUNCTION %s ended without RETURN
Error number: 1322; Symbol: ER_SP_BAD_CURSOR_QUERY; SQLSTATE: 42000
Message: Cursor statement must be a SELECT
Error number: 1323; Symbol: ER_SP_BAD_CURSOR_SELECT; SQLSTATE: 42000
Message: Cursor SELECT must not have INTO
Error number: 1324; Symbol: ER_SP_CURSOR_MISMATCH; SQLSTATE: 42000
Message: Undefined CURSOR: %s
Error number: 1325; Symbol: ER_SP_CURSOR_ALREADY_OPEN; SQLSTATE: 24000
Message: Cursor is already open
Error number: 1326; Symbol: ER_SP_CURSOR_NOT_OPEN; SQLSTATE: 24000
Message: Cursor is not open
Error number: 1327; Symbol: ER_SP_UNDECLARED_VAR; SQLSTATE: 42000
Message: Undeclared variable: %s
Error number: 1328; Symbol: ER_SP_WRONG_NO_OF_FETCH_ARGS; SQLSTATE: HY000
Message: Incorrect number of FETCH variables
Error number: 1329; Symbol: ER_SP_FETCH_NO_DATA; SQLSTATE: 02000
Message: No data - zero rows fetched, selected, or processed
Error number: 1330; Symbol: ER_SP_DUP_PARAM; SQLSTATE: 42000
Message: Duplicate parameter: %s
Error number: 1331; Symbol: ER_SP_DUP_VAR; SQLSTATE: 42000
Message: Duplicate variable: %s
Error number: 1332; Symbol: ER_SP_DUP_COND; SQLSTATE: 42000
Message: Duplicate condition: %s
Error number: 1333; Symbol: ER_SP_DUP_CURS; SQLSTATE: 42000
Message: Duplicate cursor: %s
Error number: 1334; Symbol: ER_SP_CANT_ALTER; SQLSTATE: HY000
Message: Failed to ALTER %s %s
Error number: 1335; Symbol: ER_SP_SUBSELECT_NYI; SQLSTATE: 0A000
Message: Subquery value not supported
Error number: 1336; Symbol: ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG; SQLSTATE: 0A000
Message: %s is not allowed in stored function or trigger
Error number: 1337; Symbol: ER_SP_VARCOND_AFTER_CURSHNDLR; SQLSTATE: 42000
Message: Variable or condition declaration after cursor or handler declaration
Error number: 1338; Symbol: ER_SP_CURSOR_AFTER_HANDLER; SQLSTATE: 42000
Message: Cursor declaration after handler declaration
Error number: 1339; Symbol: ER_SP_CASE_NOT_FOUND; SQLSTATE: 20000
Message: Case not found for CASE statement
Error number: 1340; Symbol: ER_FPARSER_TOO_BIG_FILE; SQLSTATE: HY000
Message: Configuration file '%s' is too big
Error number: 1341; Symbol: ER_FPARSER_BAD_HEADER; SQLSTATE: HY000
Message: Malformed file type header in file '%s'
Error number: 1342; Symbol: ER_FPARSER_EOF_IN_COMMENT; SQLSTATE: HY000
Message: Unexpected end of file while parsing comment '%s'
Error number: 1343; Symbol: ER_FPARSER_ERROR_IN_PARAMETER; SQLSTATE: HY000
Message: Error while parsing parameter '%s' (line: '%s')
Error number: 1344; Symbol: ER_FPARSER_EOF_IN_UNKNOWN_PARAMETER; SQLSTATE: HY000
Message: Unexpected end of file while skipping unknown parameter '%s'
Error number: 1345; Symbol: ER_VIEW_NO_EXPLAIN; SQLSTATE: HY000
Message: EXPLAIN/SHOW can not be issued; lacking privileges for underlying table
Error number: 1346; Symbol: ER_FRM_UNKNOWN_TYPE; SQLSTATE: HY000
Message: File '%s' has unknown type '%s' in its header
Error number: 1347; Symbol: ER_WRONG_OBJECT; SQLSTATE: HY000
Message: '%s.%s' is not %s
The named object is incorrect for the type of operation attempted on it. It must be an object of the named type.
Error number: 1348; Symbol: ER_NONUPDATEABLE_COLUMN; SQLSTATE: HY000
Message: Column '%s' is not updatable
Error number: 1349; Symbol: ER_VIEW_SELECT_DERIVED; SQLSTATE: HY000
Message: View's SELECT contains a subquery in the FROM clause
Error number: 1350; Symbol: ER_VIEW_SELECT_CLAUSE; SQLSTATE: HY000
Message: View's SELECT contains a '%s' clause
Error number: 1351; Symbol: ER_VIEW_SELECT_VARIABLE; SQLSTATE: HY000
Message: View's SELECT contains a variable or parameter
Error number: 1352; Symbol: ER_VIEW_SELECT_TMPTABLE; SQLSTATE: HY000
Message: View's SELECT refers to a temporary table '%s'
Error number: 1353; Symbol: ER_VIEW_WRONG_LIST; SQLSTATE: HY000
Message: View's SELECT and view's field list have different column counts
Error number: 1354; Symbol: ER_WARN_VIEW_MERGE; SQLSTATE: HY000
Message: View merge algorithm can't be used here for now (assumed undefined algorithm)
Error number: 1355; Symbol: ER_WARN_VIEW_WITHOUT_KEY; SQLSTATE: HY000
Message: View being updated does not have complete key of underlying table in it
Error number: 1356; Symbol: ER_VIEW_INVALID; SQLSTATE: HY000
Message: View '%s.%s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
Error number: 1357; Symbol: ER_SP_NO_DROP_SP; SQLSTATE: HY000
Message: Can't drop or alter a %s from within another stored routine
Error number: 1358; Symbol: ER_SP_GOTO_IN_HNDLR; SQLSTATE: HY000
Message: GOTO is not allowed in a stored procedure handler
Error number: 1359; Symbol: ER_TRG_ALREADY_EXISTS; SQLSTATE: HY000
Message: Trigger already exists
Error number: 1360; Symbol: ER_TRG_DOES_NOT_EXIST; SQLSTATE: HY000
Message: Trigger does not exist
Error number: 1361; Symbol: ER_TRG_ON_VIEW_OR_TEMP_TABLE; SQLSTATE: HY000
Message: Trigger's '%s' is view or temporary table
Error number: 1362; Symbol: ER_TRG_CANT_CHANGE_ROW; SQLSTATE: HY000
Message: Updating of %s row is not allowed in %strigger
Error number: 1363; Symbol: ER_TRG_NO_SUCH_ROW_IN_TRG; SQLSTATE: HY000
Message: There is no %s row in %s trigger
Error number: 1364; Symbol: ER_NO_DEFAULT_FOR_FIELD; SQLSTATE: HY000
Message: Field '%s' doesn't have a default value
Error number: 1365; Symbol: ER_DIVISION_BY_ZERO; SQLSTATE: 22012
Message: Division by 0
Error number: 1366; Symbol: ER_TRUNCATED_WRONG_VALUE_FOR_FIELD; SQLSTATE: HY000
Message: Incorrect %s value: '%s' for column '%s' at row %ld
Error number: 1367; Symbol: ER_ILLEGAL_VALUE_FOR_TYPE; SQLSTATE: 22007
Message: Illegal %s '%s' value found during parsing
Error number: 1368; Symbol: ER_VIEW_NONUPD_CHECK; SQLSTATE: HY000
Message: CHECK OPTION on non-updatable view '%s.%s'
Error number: 1369; Symbol: ER_VIEW_CHECK_FAILED; SQLSTATE: HY000
Message: CHECK OPTION failed '%s.%s'
Error number: 1370; Symbol: ER_PROCACCESS_DENIED_ERROR; SQLSTATE: 42000
Message: %s command denied to user '%s'@'%s' for routine '%s'
Error number: 1371; Symbol: ER_RELAY_LOG_FAIL; SQLSTATE: HY000
Message: Failed purging old relay logs: %s
Error number: 1372; Symbol: ER_PASSWD_LENGTH; SQLSTATE: HY000
Message: Password hash should be a %d-digit hexadecimal number
Error number: 1373; Symbol: ER_UNKNOWN_TARGET_BINLOG; SQLSTATE: HY000
Message: Target log not found in binlog index
Error number: 1374; Symbol: ER_IO_ERR_LOG_INDEX_READ; SQLSTATE: HY000
Message: I/O error reading log index file
Error number: 1375; Symbol: ER_BINLOG_PURGE_PROHIBITED; SQLSTATE: HY000
Message: Server configuration does not permit binlog purge
Error number: 1376; Symbol: ER_FSEEK_FAIL; SQLSTATE: HY000
Message: Failed on fseek()
Error number: 1377; Symbol: ER_BINLOG_PURGE_FATAL_ERR; SQLSTATE: HY000
Message: Fatal error during log purge
Error number: 1378; Symbol: ER_LOG_IN_USE; SQLSTATE: HY000
Message: A purgeable log is in use, will not purge
Error number: 1379; Symbol: ER_LOG_PURGE_UNKNOWN_ERR; SQLSTATE: HY000
Message: Unknown error during log purge
Error number: 1380; Symbol: ER_RELAY_LOG_INIT; SQLSTATE: HY000
Message: Failed initializing relay log position: %s
Error number: 1381; Symbol: ER_NO_BINARY_LOGGING; SQLSTATE: HY000
Message: You are not using binary logging
Error number: 1382; Symbol: ER_RESERVED_SYNTAX; SQLSTATE: HY000
Message: The '%s' syntax is reserved for purposes internal to the MySQL server
Error number: 1383; Symbol: ER_WSAS_FAILED; SQLSTATE: HY000
Message: WSAStartup Failed
Error number: 1384; Symbol: ER_DIFF_GROUPS_PROC; SQLSTATE: HY000
Message: Can't handle procedures with different groups yet
Error number: 1385; Symbol: ER_NO_GROUP_FOR_PROC; SQLSTATE: HY000
Message: Select must have a group with this procedure
Error number: 1386; Symbol: ER_ORDER_WITH_PROC; SQLSTATE: HY000
Message: Can't use ORDER clause with this procedure
Error number: 1387; Symbol: ER_LOGGING_PROHIBIT_CHANGING_OF; SQLSTATE: HY000
Message: Binary logging and replication forbid changing the global server %s
Error number: 1388; Symbol: ER_NO_FILE_MAPPING; SQLSTATE: HY000
Message: Can't map file: %s, errno: %d
Error number: 1389; Symbol: ER_WRONG_MAGIC; SQLSTATE: HY000
Message: Wrong magic in %s
Error number: 1390; Symbol: ER_PS_MANY_PARAM; SQLSTATE: HY000
Message: Prepared statement contains too many placeholders
Error number: 1391; Symbol: ER_KEY_PART_0; SQLSTATE: HY000
Message: Key part '%s' length cannot be 0
Error number: 1392; Symbol: ER_VIEW_CHECKSUM; SQLSTATE: HY000
Message: View text checksum failed
Error number: 1393; Symbol: ER_VIEW_MULTIUPDATE; SQLSTATE: HY000
Message: Can not modify more than one base table through a join view '%s.%s'
Error number: 1394; Symbol: ER_VIEW_NO_INSERT_FIELD_LIST; SQLSTATE: HY000
Message: Can not insert into join view '%s.%s' without fields list
Error number: 1395; Symbol: ER_VIEW_DELETE_MERGE_VIEW; SQLSTATE: HY000
Message: Can not delete from join view '%s.%s'
Error number: 1396; Symbol: ER_CANNOT_USER; SQLSTATE: HY000
Message: Operation %s failed for %s
Error number: 1397; Symbol: ER_XAER_NOTA; SQLSTATE: XAE04
Message: XAER_NOTA: Unknown XID
Error number: 1398; Symbol: ER_XAER_INVAL; SQLSTATE: XAE05
Message: XAER_INVAL: Invalid arguments (or unsupported command)
Error number: 1399; Symbol: ER_XAER_RMFAIL; SQLSTATE: XAE07
Message: XAER_RMFAIL: The command cannot be executed when global transaction is in the %s state
Error number: 1400; Symbol: ER_XAER_OUTSIDE; SQLSTATE: XAE09
Message: XAER_OUTSIDE: Some work is done outside global transaction
Error number: 1401; Symbol: ER_XAER_RMERR; SQLSTATE: XAE03
Message: XAER_RMERR: Fatal error occurred in the transaction branch - check your data for consistency
Error number: 1402; Symbol: ER_XA_RBROLLBACK; SQLSTATE: XA100
Message: XA_RBROLLBACK: Transaction branch was rolled back
Error number: 1403; Symbol: ER_NONEXISTING_PROC_GRANT; SQLSTATE: 42000
Message: There is no such grant defined for user '%s' on host '%s' on routine '%s'
Error number: 1404; Symbol: ER_PROC_AUTO_GRANT_FAIL; SQLSTATE: HY000
Message: Failed to grant EXECUTE and ALTER ROUTINE privileges
Error number: 1405; Symbol: ER_PROC_AUTO_REVOKE_FAIL; SQLSTATE: HY000
Message: Failed to revoke all privileges to dropped routine
Error number: 1406; Symbol: ER_DATA_TOO_LONG; SQLSTATE: 22001
Message: Data too long for column '%s' at row %ld
Error number: 1407; Symbol: ER_SP_BAD_SQLSTATE; SQLSTATE: 42000
Message: Bad SQLSTATE: '%s'
Error number: 1408; Symbol: ER_STARTUP; SQLSTATE: HY000
Message: %s: ready for connections. Version: '%s' socket: '%s' port: %d %s
Error number: 1409; Symbol: ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR; SQLSTATE: HY000
Message: Can't load value from file with fixed size rows to variable
Error number: 1410; Symbol: ER_CANT_CREATE_USER_WITH_GRANT; SQLSTATE: 42000
Message: You are not allowed to create a user with GRANT
Error number: 1411; Symbol: ER_WRONG_VALUE_FOR_TYPE; SQLSTATE: HY000
Message: Incorrect %s value: '%s' for function %s
Error number: 1412; Symbol: ER_TABLE_DEF_CHANGED; SQLSTATE: HY000
Message: Table definition has changed, please retry transaction
Error number: 1413; Symbol: ER_SP_DUP_HANDLER; SQLSTATE: 42000
Message: Duplicate handler declared in the same block
Error number: 1414; Symbol: ER_SP_NOT_VAR_ARG; SQLSTATE: 42000
Message: OUT or INOUT argument %d for routine %s is not a variable or NEW pseudo-variable in BEFORE trigger
Error number: 1415; Symbol: ER_SP_NO_RETSET; SQLSTATE: 0A000
Message: Not allowed to return a result set from a %s
Error number: 1416; Symbol: ER_CANT_CREATE_GEOMETRY_OBJECT; SQLSTATE: 22003
Message: Cannot get geometry object from data you send to the GEOMETRY field
Error number: 1417; Symbol: ER_FAILED_ROUTINE_BREAK_BINLOG; SQLSTATE: HY000
Message: A routine failed and has neither NO SQL nor READS SQL DATA in its declaration and binary logging is enabled; if non-transactional tables were updated, the binary log will miss their changes
Error number: 1418; Symbol: ER_BINLOG_UNSAFE_ROUTINE; SQLSTATE: HY000
Message: This function has none of DETERMINISTIC, NO SQL, or READS SQL DATA in its declaration and binary logging is enabled (you might want to use the less safe log_bin_trust_function_creators variable)
Error number: 1419; Symbol: ER_BINLOG_CREATE_ROUTINE_NEED_SUPER; SQLSTATE: HY000
Message: You do not have the SUPER privilege and binary logging is enabled (you might want to use the less safe log_bin_trust_function_creators variable)
Error number: 1420; Symbol: ER_EXEC_STMT_WITH_OPEN_CURSOR; SQLSTATE: HY000
Message: You can't execute a prepared statement which has an open cursor associated with it. Reset the statement to re-execute it.
Error number: 1421; Symbol: ER_STMT_HAS_NO_OPEN_CURSOR; SQLSTATE: HY000
Message: The statement (%lu) has no open cursor.
Error number: 1422; Symbol: ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG; SQLSTATE: HY000
Message: Explicit or implicit commit is not allowed in stored function or trigger.
Error number: 1423; Symbol: ER_NO_DEFAULT_FOR_VIEW_FIELD; SQLSTATE: HY000
Message: Field of view '%s.%s' underlying table doesn't have a default value
Error number: 1424; Symbol: ER_SP_NO_RECURSION; SQLSTATE: HY000
Message: Recursive stored functions and triggers are not allowed.
Error number: 1425; Symbol: ER_TOO_BIG_SCALE; SQLSTATE: 42000
Message: Too big scale %d specified for column '%s'. Maximum is %lu.
Error number: 1426; Symbol: ER_TOO_BIG_PRECISION; SQLSTATE: 42000
Message: Too big precision %d specified for column '%s'. Maximum is %lu.
Error number: 1427; Symbol: ER_M_BIGGER_THAN_D; SQLSTATE: 42000
Message: For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%s').
Error number: 1428; Symbol: ER_WRONG_LOCK_OF_SYSTEM_TABLE; SQLSTATE: HY000
Message: You can't combine write-locking of system tables with other tables or lock types
Error number: 1429; Symbol: ER_CONNECT_TO_FOREIGN_DATA_SOURCE; SQLSTATE: HY000
Message: Unable to connect to foreign data source: %s
Error number: 1430; Symbol: ER_QUERY_ON_FOREIGN_DATA_SOURCE; SQLSTATE: HY000
Message: There was a problem processing the query on the foreign data source. Data source error: %s
Error number: 1431; Symbol: ER_FOREIGN_DATA_SOURCE_DOESNT_EXIST; SQLSTATE: HY000
Message: The foreign data source you are trying to reference does not exist. Data source error: %s
Error number: 1432; Symbol: ER_FOREIGN_DATA_STRING_INVALID_CANT_CREATE; SQLSTATE: HY000
Message: Can't create federated table. The data source connection string '%s' is not in the correct format
Error number: 1433; Symbol: ER_FOREIGN_DATA_STRING_INVALID; SQLSTATE: HY000
Message: The data source connection string '%s' is not in the correct format
Error number: 1434; Symbol: ER_CANT_CREATE_FEDERATED_TABLE; SQLSTATE: HY000
Message: Can't create federated table. Foreign data src error: %s
Error number: 1435; Symbol: ER_TRG_IN_WRONG_SCHEMA; SQLSTATE: HY000
Message: Trigger in wrong schema
Error number: 1436; Symbol: ER_STACK_OVERRUN_NEED_MORE; SQLSTATE: HY000
Message: Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'mysqld --thread_stack=#' to specify a bigger stack.
Error number: 1437; Symbol: ER_TOO_LONG_BODY; SQLSTATE: 42000
Message: Routine body for '%s' is too long
Error number: 1438; Symbol: ER_WARN_CANT_DROP_DEFAULT_KEYCACHE; SQLSTATE: HY000
Message: Cannot drop default keycache
Error number: 1439; Symbol: ER_TOO_BIG_DISPLAYWIDTH; SQLSTATE: 42000
Message: Display width out of range for column '%s' (max = %lu)
Error number: 1440; Symbol: ER_XAER_DUPID; SQLSTATE: XAE08
Message: XAER_DUPID: The XID already exists
Error number: 1441; Symbol: ER_DATETIME_FUNCTION_OVERFLOW; SQLSTATE: 22008
Message: Datetime function: %s field overflow
Error number: 1442; Symbol: ER_CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG; SQLSTATE: HY000
Message: Can't update table '%s' in stored function/trigger because it is already used by statement which invoked this stored function/trigger.
Error number: 1443; Symbol: ER_VIEW_PREVENT_UPDATE; SQLSTATE: HY000
Message: The definition of table '%s' prevents operation %s on table '%s'.
Error number: 1444; Symbol: ER_PS_NO_RECURSION; SQLSTATE: HY000
Message: The prepared statement contains a stored routine call that refers to that same statement. It's not allowed to execute a prepared statement in such a recursive manner
Error number: 1445; Symbol: ER_SP_CANT_SET_AUTOCOMMIT; SQLSTATE: HY000
Message: Not allowed to set autocommit from a stored function or trigger
Error number: 1446; Symbol: ER_MALFORMED_DEFINER; SQLSTATE: HY000
Message: Definer is not fully qualified
Error number: 1447; Symbol: ER_VIEW_FRM_NO_USER; SQLSTATE: HY000
Message: View '%s'.'%s' has no definer information (old table format). Current user is used as definer. Please recreate the view!
Error number: 1448; Symbol: ER_VIEW_OTHER_USER; SQLSTATE: HY000
Message: You need the SUPER privilege for creation view with '%s'@'%s' definer
Error number: 1449; Symbol: ER_NO_SUCH_USER; SQLSTATE: HY000
Message: The user specified as a definer ('%s'@'%s') does not exist
Error number: 1450; Symbol: ER_FORBID_SCHEMA_CHANGE; SQLSTATE: HY000
Message: Changing schema from '%s' to '%s' is not allowed.
Error number: 1451; Symbol: ER_ROW_IS_REFERENCED_2; SQLSTATE: 23000
Message: Cannot delete or update a parent row: a foreign key constraint fails (%s)
InnoDB reports this error when you try to delete a parent row that has children, and a foreign key constraint fails. Delete the children first.
Error number: 1452; Symbol: ER_NO_REFERENCED_ROW_2; SQLSTATE: 23000
Message: Cannot add or update a child row: a foreign key constraint fails (%s)
InnoDB reports this error when you try to add a row but there is no parent row, and a foreign key constraint fails. Add the parent row first.
Error number: 1453; Symbol: ER_SP_BAD_VAR_SHADOW; SQLSTATE: 42000
Message: Variable '%s' must be quoted with ..., or renamed
Error number: 1454; Symbol: ER_TRG_NO_DEFINER; SQLSTATE: HY000
Message: No definer attribute for trigger '%s'.'%s'. The trigger will be activated under the authorization of the invoker, which may have insufficient privileges. Please recreate the trigger.
Error number: 1455; Symbol: ER_OLD_FILE_FORMAT; SQLSTATE: HY000
Message: '%s' has an old format, you should re-create the '%s' object(s)
Error number: 1456; Symbol: ER_SP_RECURSION_LIMIT; SQLSTATE: HY000
Message: Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %s
Error number: 1457; Symbol: ER_SP_PROC_TABLE_CORRUPT; SQLSTATE: HY000
Message: Failed to load routine %s. The table mysql.proc is missing, corrupt, or contains bad data (internal code %d)
Error number: 1458; Symbol: ER_SP_WRONG_NAME; SQLSTATE: 42000
Message: Incorrect routine name '%s'
Error number: 1459; Symbol: ER_TABLE_NEEDS_UPGRADE; SQLSTATE: HY000
Message: Table upgrade required. Please do "REPAIR TABLE %s" or dump/reload to fix it!
Error number: 1460; Symbol: ER_SP_NO_AGGREGATE; SQLSTATE: 42000
Message: AGGREGATE is not supported for stored functions
Error number: 1461; Symbol: ER_MAX_PREPARED_STMT_COUNT_REACHED; SQLSTATE: 42000
Message: Can't create more than max_prepared_stmt_count statements (current value: %lu)
Error number: 1462; Symbol: ER_VIEW_RECURSIVE; SQLSTATE: HY000
Message: %s.%s contains view recursion
Error number: 1463; Symbol: ER_NON_GROUPING_FIELD_USED; SQLSTATE: 42000
Message: Non-grouping field '%s' is used in %s clause
Error number: 1464; Symbol: ER_TABLE_CANT_HANDLE_SPKEYS; SQLSTATE: HY000
Message: The used table type doesn't support SPATIAL indexes
Error number: 1465; Symbol: ER_NO_TRIGGERS_ON_SYSTEM_SCHEMA; SQLSTATE: HY000
Message: Triggers can not be created on system tables
Error number: 1466; Symbol: ER_REMOVED_SPACES; SQLSTATE: HY000
Message: Leading spaces are removed from name '%s'
Error number: 1467; Symbol: ER_AUTOINC_READ_FAILED; SQLSTATE: HY000
Message: Failed to read auto-increment value from storage engine
Error number: 1468; Symbol: ER_USERNAME; SQLSTATE: HY000
Message: user name
Error number: 1469; Symbol: ER_HOSTNAME; SQLSTATE: HY000
Message: host name
Error number: 1470; Symbol: ER_WRONG_STRING_LENGTH; SQLSTATE: HY000
Message: String '%s' is too long for %s (should be no longer than %d)
Error number: 1471; Symbol: ER_NON_INSERTABLE_TABLE; SQLSTATE: HY000
Message: The target table %s of the %s is not insertable-into
Error number: 1472; Symbol: ER_ADMIN_WRONG_MRG_TABLE; SQLSTATE: HY000
Message: Table '%s' is differently defined or of non-MyISAM type or doesn't exist
Error number: 1473; Symbol: ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT; SQLSTATE: HY000
Message: Too high level of nesting for select
Error number: 1474; Symbol: ER_NAME_BECOMES_EMPTY; SQLSTATE: HY000
Message: Name '%s' has become ''
Error number: 1475; Symbol: ER_AMBIGUOUS_FIELD_TERM; SQLSTATE: HY000
Message: First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY
Error number: 1476; Symbol: ER_FOREIGN_SERVER_EXISTS; SQLSTATE: HY000
Message: The foreign server, %s, you are trying to create already exists.
Error number: 1477; Symbol: ER_FOREIGN_SERVER_DOESNT_EXIST; SQLSTATE: HY000
Message: The foreign server name you are trying to reference does not exist. Data source error: %s
Error number: 1478; Symbol: ER_ILLEGAL_HA_CREATE_OPTION; SQLSTATE: HY000
Message: Table storage engine '%s' does not support the create option '%s'
Error number: 1479; Symbol: ER_PARTITION_REQUIRES_VALUES_ERROR; SQLSTATE: HY000
Message: Syntax error: %s PARTITIONING requires definition of VALUES %s for each partition
Error number: 1480; Symbol: ER_PARTITION_WRONG_VALUES_ERROR; SQLSTATE: HY000
Message: Only %s PARTITIONING can use VALUES %s in partition definition
Error number: 1481; Symbol: ER_PARTITION_MAXVALUE_ERROR; SQLSTATE: HY000
Message: MAXVALUE can only be used in last partition definition
Error number: 1482; Symbol: ER_PARTITION_SUBPARTITION_ERROR; SQLSTATE: HY000
Message: Subpartitions can only be hash partitions and by key
Error number: 1483; Symbol: ER_PARTITION_SUBPART_MIX_ERROR; SQLSTATE: HY000
Message: Must define subpartitions on all partitions if on one partition
Error number: 1484; Symbol: ER_PARTITION_WRONG_NO_PART_ERROR; SQLSTATE: HY000
Message: Wrong number of partitions defined, mismatch with previous setting
Error number: 1485; Symbol: ER_PARTITION_WRONG_NO_SUBPART_ERROR; SQLSTATE: HY000
Message: Wrong number of subpartitions defined, mismatch with previous setting
Error number: 1486; Symbol: ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR; SQLSTATE: HY000
Message: Constant, random or timezone-dependent expressions in (sub)partitioning function are not allowed
Error number: 1487; Symbol: ER_NO_CONST_EXPR_IN_RANGE_OR_LIST_ERROR; SQLSTATE: HY000
Message: Expression in RANGE/LIST VALUES must be constant
Error number: 1488; Symbol: ER_FIELD_NOT_FOUND_PART_ERROR; SQLSTATE: HY000
Message: Field in list of fields for partition function not found in table
Error number: 1489; Symbol: ER_LIST_OF_FIELDS_ONLY_IN_HASH_ERROR; SQLSTATE: HY000
Message: List of fields is only allowed in KEY partitions
Error number: 1490; Symbol: ER_INCONSISTENT_PARTITION_INFO_ERROR; SQLSTATE: HY000
Message: The partition info in the frm file is not consistent with what can be written into the frm file
Error number: 1491; Symbol: ER_PARTITION_FUNC_NOT_ALLOWED_ERROR; SQLSTATE: HY000
Message: The %s function returns the wrong type
Error number: 1492; Symbol: ER_PARTITIONS_MUST_BE_DEFINED_ERROR; SQLSTATE: HY000
Message: For %s partitions each partition must be defined
Error number: 1493; Symbol: ER_RANGE_NOT_INCREASING_ERROR; SQLSTATE: HY000
Message: VALUES LESS THAN value must be strictly increasing for each partition
Error number: 1494; Symbol: ER_INCONSISTENT_TYPE_OF_FUNCTIONS_ERROR; SQLSTATE: HY000
Message: VALUES value must be of same type as partition function
Error number: 1495; Symbol: ER_MULTIPLE_DEF_CONST_IN_LIST_PART_ERROR; SQLSTATE: HY000
Message: Multiple definition of same constant in list partitioning
Error number: 1496; Symbol: ER_PARTITION_ENTRY_ERROR; SQLSTATE: HY000
Message: Partitioning can not be used stand-alone in query
Error number: 1497; Symbol: ER_MIX_HANDLER_ERROR; SQLSTATE: HY000
Message: The mix of handlers in the partitions is not allowed in this version of MySQL
Error number: 1498; Symbol: ER_PARTITION_NOT_DEFINED_ERROR; SQLSTATE: HY000
Message: For the partitioned engine it is necessary to define all %s
Error number: 1499; Symbol: ER_TOO_MANY_PARTITIONS_ERROR; SQLSTATE: HY000
Message: Too many partitions (including subpartitions) were defined
Error number: 1500; Symbol: ER_SUBPARTITION_ERROR; SQLSTATE: HY000
Message: It is only possible to mix RANGE/LIST partitioning with HASH/KEY partitioning for subpartitioning
Error number: 1501; Symbol: ER_CANT_CREATE_HANDLER_FILE; SQLSTATE: HY000
Message: Failed to create specific handler file
Error number: 1502; Symbol: ER_BLOB_FIELD_IN_PART_FUNC_ERROR; SQLSTATE: HY000
Message: A BLOB field is not allowed in partition function
Error number: 1503; Symbol: ER_UNIQUE_KEY_NEED_ALL_FIELDS_IN_PF; SQLSTATE: HY000
Message: A %s must include all columns in the table's partitioning function
Error number: 1504; Symbol: ER_NO_PARTS_ERROR; SQLSTATE: HY000
Message: Number of %s = 0 is not an allowed value
Error number: 1505; Symbol: ER_PARTITION_MGMT_ON_NONPARTITIONED; SQLSTATE: HY000
Message: Partition management on a not partitioned table is not possible
Error number: 1506; Symbol: ER_FOREIGN_KEY_ON_PARTITIONED; SQLSTATE: HY000
Message: Foreign key clause is not yet supported in conjunction with partitioning
Error number: 1507; Symbol: ER_DROP_PARTITION_NON_EXISTENT; SQLSTATE: HY000
Message: Error in list of partitions to %s
Error number: 1508; Symbol: ER_DROP_LAST_PARTITION; SQLSTATE: HY000
Message: Cannot remove all partitions, use DROP TABLE instead
Error number: 1509; Symbol: ER_COALESCE_ONLY_ON_HASH_PARTITION; SQLSTATE: HY000
Message: COALESCE PARTITION can only be used on HASH/KEY partitions
Error number: 1510; Symbol: ER_REORG_HASH_ONLY_ON_SAME_NO; SQLSTATE: HY000
Message: REORGANIZE PARTITION can only be used to reorganize partitions not to change their numbers
Error number: 1511; Symbol: ER_REORG_NO_PARAM_ERROR; SQLSTATE: HY000
Message: REORGANIZE PARTITION without parameters can only be used on auto-partitioned tables using HASH PARTITIONs
Error number: 1512; Symbol: ER_ONLY_ON_RANGE_LIST_PARTITION; SQLSTATE: HY000
Message: %s PARTITION can only be used on RANGE/LIST partitions
Error number: 1513; Symbol: ER_ADD_PARTITION_SUBPART_ERROR; SQLSTATE: HY000
Message: Trying to Add partition(s) with wrong number of subpartitions
Error number: 1514; Symbol: ER_ADD_PARTITION_NO_NEW_PARTITION; SQLSTATE: HY000
Message: At least one partition must be added
Error number: 1515; Symbol: ER_COALESCE_PARTITION_NO_PARTITION; SQLSTATE: HY000
Message: At least one partition must be coalesced
Error number: 1516; Symbol: ER_REORG_PARTITION_NOT_EXIST; SQLSTATE: HY000
Message: More partitions to reorganize than there are partitions
Error number: 1517; Symbol: ER_SAME_NAME_PARTITION; SQLSTATE: HY000
Message: Duplicate partition name %s
Error number: 1518; Symbol: ER_NO_BINLOG_ERROR; SQLSTATE: HY000
Message: It is not allowed to shut off binlog on this command
Error number: 1519; Symbol: ER_CONSECUTIVE_REORG_PARTITIONS; SQLSTATE: HY000
Message: When reorganizing a set of partitions they must be in consecutive order
Error number: 1520; Symbol: ER_REORG_OUTSIDE_RANGE; SQLSTATE: HY000
Message: Reorganize of range partitions cannot change total ranges except for last partition where it can extend the range
Error number: 1521; Symbol: ER_PARTITION_FUNCTION_FAILURE; SQLSTATE: HY000
Message: Partition function not supported in this version for this handler
Error number: 1522; Symbol: ER_PART_STATE_ERROR; SQLSTATE: HY000
Message: Partition state cannot be defined from CREATE/ALTER TABLE
Error number: 1523; Symbol: ER_LIMITED_PART_RANGE; SQLSTATE: HY000
Message: The %s handler only supports 32 bit integers in VALUES
Error number: 1524; Symbol: ER_PLUGIN_IS_NOT_LOADED; SQLSTATE: HY000
Message: Plugin '%s' is not loaded
Error number: 1525; Symbol: ER_WRONG_VALUE; SQLSTATE: HY000
Message: Incorrect %s value: '%s'
Error number: 1526; Symbol: ER_NO_PARTITION_FOR_GIVEN_VALUE; SQLSTATE: HY000
Message: Table has no partition for value %s
Error number: 1527; Symbol: ER_FILEGROUP_OPTION_ONLY_ONCE; SQLSTATE: HY000
Message: It is not allowed to specify %s more than once
Error number: 1528; Symbol: ER_CREATE_FILEGROUP_FAILED; SQLSTATE: HY000
Message: Failed to create %s
Error number: 1529; Symbol: ER_DROP_FILEGROUP_FAILED; SQLSTATE: HY000
Message: Failed to drop %s
Error number: 1530; Symbol: ER_TABLESPACE_AUTO_EXTEND_ERROR; SQLSTATE: HY000
Message: The handler doesn't support autoextend of tablespaces
Error number: 1531; Symbol: ER_WRONG_SIZE_NUMBER; SQLSTATE: HY000
Message: A size parameter was incorrectly specified, either number or on the form 10M
Error number: 1532; Symbol: ER_SIZE_OVERFLOW_ERROR; SQLSTATE: HY000
Message: The size number was correct but we don't allow the digit part to be more than 2 billion
Error number: 1533; Symbol: ER_ALTER_FILEGROUP_FAILED; SQLSTATE: HY000
Message: Failed to alter: %s
Error number: 1534; Symbol: ER_BINLOG_ROW_LOGGING_FAILED; SQLSTATE: HY000
Message: Writing one row to the row-based binary log failed
Error number: 1535; Symbol: ER_BINLOG_ROW_WRONG_TABLE_DEF; SQLSTATE: HY000
Message: Table definition on master and slave does not match: %s
Error number: 1536; Symbol: ER_BINLOG_ROW_RBR_TO_SBR; SQLSTATE: HY000
Message: Slave running with --log-slave-updates must use row-based binary logging to be able to replicate row-based binary log events
Error number: 1537; Symbol: ER_EVENT_ALREADY_EXISTS; SQLSTATE: HY000
Message: Event '%s' already exists
Error number: 1538; Symbol: ER_EVENT_STORE_FAILED; SQLSTATE: HY000
Message: Failed to store event %s. Error code %d from storage engine.
Error number: 1539; Symbol: ER_EVENT_DOES_NOT_EXIST; SQLSTATE: HY000
Message: Unknown event '%s'
Error number: 1540; Symbol: ER_EVENT_CANT_ALTER; SQLSTATE: HY000
Message: Failed to alter event '%s'
Error number: 1541; Symbol: ER_EVENT_DROP_FAILED; SQLSTATE: HY000
Message: Failed to drop %s
Error number: 1542; Symbol: ER_EVENT_INTERVAL_NOT_POSITIVE_OR_TOO_BIG; SQLSTATE: HY000
Message: INTERVAL is either not positive or too big
Error number: 1543; Symbol: ER_EVENT_ENDS_BEFORE_STARTS; SQLSTATE: HY000
Message: ENDS is either invalid or before STARTS
Error number: 1544; Symbol: ER_EVENT_EXEC_TIME_IN_THE_PAST; SQLSTATE: HY000
Message: Event execution time is in the past. Event has been disabled
Error number: 1545; Symbol: ER_EVENT_OPEN_TABLE_FAILED; SQLSTATE: HY000
Message: Failed to open mysql.event
Error number: 1546; Symbol: ER_EVENT_NEITHER_M_EXPR_NOR_M_AT; SQLSTATE: HY000
Message: No datetime expression provided
Error number: 1547; Symbol: ER_OBSOLETE_COL_COUNT_DOESNT_MATCH_CORRUPTED; SQLSTATE: HY000
Message: Column count of mysql.%s is wrong. Expected %d, found %d. The table is probably corrupted
Error number: 1548; Symbol: ER_OBSOLETE_CANNOT_LOAD_FROM_TABLE; SQLSTATE: HY000
Message: Cannot load from mysql.%s. The table is probably corrupted
Error number: 1549; Symbol: ER_EVENT_CANNOT_DELETE; SQLSTATE: HY000
Message: Failed to delete the event from mysql.event
Error number: 1550; Symbol: ER_EVENT_COMPILE_ERROR; SQLSTATE: HY000
Message: Error during compilation of event's body
Error number: 1551; Symbol: ER_EVENT_SAME_NAME; SQLSTATE: HY000
Message: Same old and new event name
Error number: 1552; Symbol: ER_EVENT_DATA_TOO_LONG; SQLSTATE: HY000
Message: Data for column '%s' too long
Error number: 1553; Symbol: ER_DROP_INDEX_FK; SQLSTATE: HY000
Message: Cannot drop index '%s': needed in a foreign key constraint
InnoDB reports this error when you attempt to drop the last index that can enforce a particular referential constraint.
For optimal performance with DML statements, InnoDB requires an index to exist on foreign key columns, so that UPDATE and DELETE operations on a parent table can easily check whether corresponding rows exist in the child table. MySQL creates or drops such indexes automatically when needed, as a side-effect of CREATE TABLE, CREATE INDEX, and ALTER TABLE statements.
When you drop an index, InnoDB checks if the index is used for checking a foreign key constraint. It is still OK to drop the index if there is another index that can be used to enforce the same constraint. InnoDB prevents you from dropping the last index that can enforce a particular referential constraint.
Error number: 1554; Symbol: ER_WARN_DEPRECATED_SYNTAX_WITH_VER; SQLSTATE: HY000
Message: The syntax '%s' is deprecated and will be removed in MySQL %s. Please use %s instead
Error number: 1555; Symbol: ER_CANT_WRITE_LOCK_LOG_TABLE; SQLSTATE: HY000
Message: You can't write-lock a log table. Only read access is possible
Error number: 1556; Symbol: ER_CANT_LOCK_LOG_TABLE; SQLSTATE: HY000
Message: You can't use locks with log tables.
Error number: 1557; Symbol: ER_FOREIGN_DUPLICATE_KEY; SQLSTATE: 23000
Message: Upholding foreign key constraints for table '%s', entry '%s', key %d would lead to a duplicate entry
In 5.6.4: ER_FOREIGN_DUPLICATE_KEY was renamed to ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED.
ER_FOREIGN_DUPLICATE_KEY was removed after 5.6.3.
Error number: 1557; Symbol: ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED; SQLSTATE: 23000
Message: Upholding foreign key constraints for table '%s', entry '%s', key %d would lead to a duplicate entry
In 5.6.4: ER_FOREIGN_DUPLICATE_KEY was renamed to ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED.
ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED was added in 5.6.4.
Error number: 1558; Symbol: ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE; SQLSTATE: HY000
Message: Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error.
Error number: 1559; Symbol: ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR; SQLSTATE: HY000
Message: Cannot switch out of the row-based binary log format when the session has open temporary tables
Error number: 1560; Symbol: ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_FORMAT; SQLSTATE: HY000
Message: Cannot change the binary logging format inside a stored function or trigger
Error number: 1561; Symbol: ER_NDB_CANT_SWITCH_BINLOG_FORMAT; SQLSTATE: HY000
Message: The NDB cluster engine does not support changing the binlog format on the fly yet
Error number: 1562; Symbol: ER_PARTITION_NO_TEMPORARY; SQLSTATE: HY000
Message: Cannot create temporary table with partitions
Error number: 1563; Symbol: ER_PARTITION_CONST_DOMAIN_ERROR; SQLSTATE: HY000
Message: Partition constant is out of partition function domain
Error number: 1564; Symbol: ER_PARTITION_FUNCTION_IS_NOT_ALLOWED; SQLSTATE: HY000
Message: This partition function is not allowed
Error number: 1565; Symbol: ER_DDL_LOG_ERROR; SQLSTATE: HY000
Message: Error in DDL log
Error number: 1566; Symbol: ER_NULL_IN_VALUES_LESS_THAN; SQLSTATE: HY000
Message: Not allowed to use NULL value in VALUES LESS THAN
Error number: 1567; Symbol: ER_WRONG_PARTITION_NAME; SQLSTATE: HY000
Message: Incorrect partition name
Error number: 1568; Symbol: ER_CANT_CHANGE_TX_ISOLATION; SQLSTATE: 25001
Message: Transaction isolation level can't be changed while a transaction is in progress
In 5.6.5: ER_CANT_CHANGE_TX_ISOLATION was renamed to ER_CANT_CHANGE_TX_CHARACTERISTICS.
ER_CANT_CHANGE_TX_ISOLATION was removed after 5.6.4.
Error number: 1568; Symbol: ER_CANT_CHANGE_TX_CHARACTERISTICS; SQLSTATE: 25001
Message: Transaction characteristics can't be changed while a transaction is in progress
In 5.6.5: ER_CANT_CHANGE_TX_ISOLATION was renamed to ER_CANT_CHANGE_TX_CHARACTERISTICS.
ER_CANT_CHANGE_TX_CHARACTERISTICS was added in 5.6.5.
Error number: 1569; Symbol: ER_DUP_ENTRY_AUTOINCREMENT_CASE; SQLSTATE: HY000
Message: ALTER TABLE causes auto_increment resequencing, resulting in duplicate entry '%s' for key '%s'
Error number: 1570; Symbol: ER_EVENT_MODIFY_QUEUE_ERROR; SQLSTATE: HY000
Message: Internal scheduler error %d
Error number: 1571; Symbol: ER_EVENT_SET_VAR_ERROR; SQLSTATE: HY000
Message: Error during starting/stopping of the scheduler. Error code %u
Error number: 1572; Symbol: ER_PARTITION_MERGE_ERROR; SQLSTATE: HY000
Message: Engine cannot be used in partitioned tables
Error number: 1573; Symbol: ER_CANT_ACTIVATE_LOG; SQLSTATE: HY000
Message: Cannot activate '%s' log
Error number: 1574; Symbol: ER_RBR_NOT_AVAILABLE; SQLSTATE: HY000
Message: The server was not built with row-based replication
Error number: 1575; Symbol: ER_BASE64_DECODE_ERROR; SQLSTATE: HY000
Message: Decoding of base64 string failed
Error number: 1576; Symbol: ER_EVENT_RECURSION_FORBIDDEN; SQLSTATE: HY000
Message: Recursion of EVENT DDL statements is forbidden when body is present
Error number: 1577; Symbol: ER_EVENTS_DB_ERROR; SQLSTATE: HY000
Message: Cannot proceed because system tables used by Event Scheduler were found damaged at server start
To address this issue, try running mysql_upgrade.
Error number: 1578; Symbol: ER_ONLY_INTEGERS_ALLOWED; SQLSTATE: HY000
Message: Only integers allowed as number here
Error number: 1579; Symbol: ER_UNSUPORTED_LOG_ENGINE; SQLSTATE: HY000
Message: This storage engine cannot be used for log tables"
Error number: 1580; Symbol: ER_BAD_LOG_STATEMENT; SQLSTATE: HY000
Message: You cannot '%s' a log table if logging is enabled
Error number: 1581; Symbol: ER_CANT_RENAME_LOG_TABLE; SQLSTATE: HY000
Message: Cannot rename '%s'. When logging enabled, rename to/from log table must rename two tables: the log table to an archive table and another table back to '%s'
Error number: 1582; Symbol: ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT; SQLSTATE: 42000
Message: Incorrect parameter count in the call to native function '%s'
Error number: 1583; Symbol: ER_WRONG_PARAMETERS_TO_NATIVE_FCT; SQLSTATE: 42000
Message: Incorrect parameters in the call to native function '%s'
Error number: 1584; Symbol: ER_WRONG_PARAMETERS_TO_STORED_FCT; SQLSTATE: 42000
Message: Incorrect parameters in the call to stored function '%s'
Error number: 1585; Symbol: ER_NATIVE_FCT_NAME_COLLISION; SQLSTATE: HY000
Message: This function '%s' has the same name as a native function
Error number: 1586; Symbol: ER_DUP_ENTRY_WITH_KEY_NAME; SQLSTATE: 23000
Message: Duplicate entry '%s' for key '%s'
The format string for this error is also used with ER_DUP_ENTRY.
Error number: 1587; Symbol: ER_BINLOG_PURGE_EMFILE; SQLSTATE: HY000
Message: Too many files opened, please execute the command again
Error number: 1588; Symbol: ER_EVENT_CANNOT_CREATE_IN_THE_PAST; SQLSTATE: HY000
Message: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
Error number: 1589; Symbol: ER_EVENT_CANNOT_ALTER_IN_THE_PAST; SQLSTATE: HY000
Message: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was not changed. Specify a time in the future.
Error number: 1590; Symbol: ER_SLAVE_INCIDENT; SQLSTATE: HY000
Message: The incident %s occured on the master. Message: %s
Error number: 1591; Symbol: ER_NO_PARTITION_FOR_GIVEN_VALUE_SILENT; SQLSTATE: HY000
Message: Table has no partition for some existing values
Error number: 1592; Symbol: ER_BINLOG_UNSAFE_STATEMENT; SQLSTATE: HY000
Message: Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. %s
Error number: 1593; Symbol: ER_SLAVE_FATAL_ERROR; SQLSTATE: HY000
Message: Fatal error: %s
Error number: 1594; Symbol: ER_SLAVE_RELAY_LOG_READ_FAILURE; SQLSTATE: HY000
Message: Relay log read failure: %s
Error number: 1595; Symbol: ER_SLAVE_RELAY_LOG_WRITE_FAILURE; SQLSTATE: HY000
Message: Relay log write failure: %s
Error number: 1596; Symbol: ER_SLAVE_CREATE_EVENT_FAILURE; SQLSTATE: HY000
Message: Failed to create %s
Error number: 1597; Symbol: ER_SLAVE_MASTER_COM_FAILURE; SQLSTATE: HY000
Message: Master command %s failed: %s
Error number: 1598; Symbol: ER_BINLOG_LOGGING_IMPOSSIBLE; SQLSTATE: HY000
Message: Binary logging not possible. Message: %s
Error number: 1599; Symbol: ER_VIEW_NO_CREATION_CTX; SQLSTATE: HY000
Message: View %s.%s has no creation context
Error number: 1600; Symbol: ER_VIEW_INVALID_CREATION_CTX; SQLSTATE: HY000
Message: Creation context of view %s.`%s' is invalid
Error number: 1601; Symbol: ER_SR_INVALID_CREATION_CTX; SQLSTATE: HY000
Message: Creation context of stored routine %s.%s is invalid
Error number: 1602; Symbol: ER_TRG_CORRUPTED_FILE; SQLSTATE: HY000
Message: Corrupted TRG file for table %s.%s
Error number: 1603; Symbol: ER_TRG_NO_CREATION_CTX; SQLSTATE: HY000
Message: Triggers for table %s.%s have no creation context
Error number: 1604; Symbol: ER_TRG_INVALID_CREATION_CTX; SQLSTATE: HY000
Message: Trigger creation context of table %s.%s is invalid
Error number: 1605; Symbol: ER_EVENT_INVALID_CREATION_CTX; SQLSTATE: HY000
Message: Creation context of event %s.%s is invalid
Error number: 1606; Symbol: ER_TRG_CANT_OPEN_TABLE; SQLSTATE: HY000
Message: Cannot open table for trigger %s.%s
Error number: 1607; Symbol: ER_CANT_CREATE_SROUTINE; SQLSTATE: HY000
Message: Cannot create stored routine %s. Check warnings
Error number: 1608; Symbol: ER_NEVER_USED; SQLSTATE: HY000
Message: Ambiguous slave modes combination. %s
Error number: 1609; Symbol: ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENT; SQLSTATE: HY000
Message: The BINLOG statement of type %s was not preceded by a format description BINLOG statement.
Error number: 1610; Symbol: ER_SLAVE_CORRUPT_EVENT; SQLSTATE: HY000
Message: Corrupted replication event was detected
Error number: 1611; Symbol: ER_LOAD_DATA_INVALID_COLUMN; SQLSTATE: HY000
Message: Invalid column reference (%s) in LOAD DATA
Error number: 1612; Symbol: ER_LOG_PURGE_NO_FILE; SQLSTATE: HY000
Message: Being purged log %s was not found
Error number: 1613; Symbol: ER_XA_RBTIMEOUT; SQLSTATE: XA106
Message: XA_RBTIMEOUT: Transaction branch was rolled back: took too long
Error number: 1614; Symbol: ER_XA_RBDEADLOCK; SQLSTATE: XA102
Message: XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected
Error number: 1615; Symbol: ER_NEED_REPREPARE; SQLSTATE: HY000
Message: Prepared statement needs to be re-prepared
Error number: 1616; Symbol: ER_DELAYED_NOT_SUPPORTED; SQLSTATE: HY000
Message: DELAYED option not supported for table '%s'
Error number: 1617; Symbol: WARN_NO_MASTER_INFO; SQLSTATE: HY000
Message: The master info structure does not exist
Error number: 1618; Symbol: WARN_OPTION_IGNORED; SQLSTATE: HY000
Message: <%s> option ignored
Error number: 1619; Symbol: WARN_PLUGIN_DELETE_BUILTIN; SQLSTATE: HY000
Message: Built-in plugins cannot be deleted
Error number: 1620; Symbol: WARN_PLUGIN_BUSY; SQLSTATE: HY000
Message: Plugin is busy and will be uninstalled on shutdown
Error number: 1621; Symbol: ER_VARIABLE_IS_READONLY; SQLSTATE: HY000
Message: %s variable '%s' is read-only. Use SET %s to assign the value
Error number: 1622; Symbol: ER_WARN_ENGINE_TRANSACTION_ROLLBACK; SQLSTATE: HY000
Message: Storage engine %s does not support rollback for this statement. Transaction rolled back and must be restarted
Error number: 1623; Symbol: ER_SLAVE_HEARTBEAT_FAILURE; SQLSTATE: HY000
Message: Unexpected master's heartbeat data: %s
Error number: 1624; Symbol: ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE; SQLSTATE: HY000
Message: The requested value for the heartbeat period is either negative or exceeds the maximum allowed (%s seconds).
Error number: 1625; Symbol: ER_NDB_REPLICATION_SCHEMA_ERROR; SQLSTATE: HY000
Message: Bad schema for mysql.ndb_replication table. Message: %s
Error number: 1626; Symbol: ER_CONFLICT_FN_PARSE_ERROR; SQLSTATE: HY000
Message: Error in parsing conflict function. Message: %s
Error number: 1627; Symbol: ER_EXCEPTIONS_WRITE_ERROR; SQLSTATE: HY000
Message: Write to exceptions table failed. Message: %s"
Error number: 1628; Symbol: ER_TOO_LONG_TABLE_COMMENT; SQLSTATE: HY000
Message: Comment for table '%s' is too long (max = %lu)
Error number: 1629; Symbol: ER_TOO_LONG_FIELD_COMMENT; SQLSTATE: HY000
Message: Comment for field '%s' is too long (max = %lu)
Error number: 1630; Symbol: ER_FUNC_INEXISTENT_NAME_COLLISION; SQLSTATE: 42000
Message: FUNCTION %s does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual
Error number: 1631; Symbol: ER_DATABASE_NAME; SQLSTATE: HY000
Message: Database
Error number: 1632; Symbol: ER_TABLE_NAME; SQLSTATE: HY000
Message: Table
Error number: 1633; Symbol: ER_PARTITION_NAME; SQLSTATE: HY000
Message: Partition
Error number: 1634; Symbol: ER_SUBPARTITION_NAME; SQLSTATE: HY000
Message: Subpartition
Error number: 1635; Symbol: ER_TEMPORARY_NAME; SQLSTATE: HY000
Message: Temporary
Error number: 1636; Symbol: ER_RENAMED_NAME; SQLSTATE: HY000
Message: Renamed
Error number: 1637; Symbol: ER_TOO_MANY_CONCURRENT_TRXS; SQLSTATE: HY000
Message: Too many active concurrent transactions
Error number: 1638; Symbol: WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED; SQLSTATE: HY000
Message: Non-ASCII separator arguments are not fully supported
Error number: 1639; Symbol: ER_DEBUG_SYNC_TIMEOUT; SQLSTATE: HY000
Message: debug sync point wait timed out
Error number: 1640; Symbol: ER_DEBUG_SYNC_HIT_LIMIT; SQLSTATE: HY000
Message: debug sync point hit limit reached
Error number: 1641; Symbol: ER_DUP_SIGNAL_SET; SQLSTATE: 42000
Message: Duplicate condition information item '%s'
Error number: 1642; Symbol: ER_SIGNAL_WARN; SQLSTATE: 01000
Message: Unhandled user-defined warning condition
Error number: 1643; Symbol: ER_SIGNAL_NOT_FOUND; SQLSTATE: 02000
Message: Unhandled user-defined not found condition
Error number: 1644; Symbol: ER_SIGNAL_EXCEPTION; SQLSTATE: HY000
Message: Unhandled user-defined exception condition
Error number: 1645; Symbol: ER_RESIGNAL_WITHOUT_ACTIVE_HANDLER; SQLSTATE: 0K000
Message: RESIGNAL when handler not active
Error number: 1646; Symbol: ER_SIGNAL_BAD_CONDITION_TYPE; SQLSTATE: HY000
Message: SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE
Error number: 1647; Symbol: WARN_COND_ITEM_TRUNCATED; SQLSTATE: HY000
Message: Data truncated for condition item '%s'
Error number: 1648; Symbol: ER_COND_ITEM_TOO_LONG; SQLSTATE: HY000
Message: Data too long for condition item '%s'
Error number: 1649; Symbol: ER_UNKNOWN_LOCALE; SQLSTATE: HY000
Message: Unknown locale: '%s'
Error number: 1650; Symbol: ER_SLAVE_IGNORE_SERVER_IDS; SQLSTATE: HY000
Message: The requested server id %d clashes with the slave startup option --replicate-same-server-id
Error number: 1651; Symbol: ER_QUERY_CACHE_DISABLED; SQLSTATE: HY000
Message: Query cache is disabled; restart the server with query_cache_type=1 to enable it
Error number: 1652; Symbol: ER_SAME_NAME_PARTITION_FIELD; SQLSTATE: HY000
Message: Duplicate partition field name '%s'
Error number: 1653; Symbol: ER_PARTITION_COLUMN_LIST_ERROR; SQLSTATE: HY000
Message: Inconsistency in usage of column lists for partitioning
Error number: 1654; Symbol: ER_WRONG_TYPE_COLUMN_VALUE_ERROR; SQLSTATE: HY000
Message: Partition column values of incorrect type
Error number: 1655; Symbol: ER_TOO_MANY_PARTITION_FUNC_FIELDS_ERROR; SQLSTATE: HY000
Message: Too many fields in '%s'
Error number: 1656; Symbol: ER_MAXVALUE_IN_VALUES_IN; SQLSTATE: HY000
Message: Cannot use MAXVALUE as value in VALUES IN
Error number: 1657; Symbol: ER_TOO_MANY_VALUES_ERROR; SQLSTATE: HY000
Message: Cannot have more than one value for this type of %s partitioning
Error number: 1658; Symbol: ER_ROW_SINGLE_PARTITION_FIELD_ERROR; SQLSTATE: HY000
Message: Row expressions in VALUES IN only allowed for multi-field column partitioning
Error number: 1659; Symbol: ER_FIELD_TYPE_NOT_ALLOWED_AS_PARTITION_FIELD; SQLSTATE: HY000
Message: Field '%s' is of a not allowed type for this type of partitioning
Error number: 1660; Symbol: ER_PARTITION_FIELDS_TOO_LONG; SQLSTATE: HY000
Message: The total length of the partitioning fields is too large
Error number: 1661; Symbol: ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since both row-incapable engines and statement-incapable engines are involved.
Error number: 1662; Symbol: ER_BINLOG_ROW_MODE_AND_STMT_ENGINE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-based logging.
Error number: 1663; Symbol: ER_BINLOG_UNSAFE_AND_STMT_ENGINE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since statement is unsafe, storage engine is limited to statement-based logging, and BINLOG_FORMAT = MIXED. %s
Error number: 1664; Symbol: ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since statement is in row format and at least one table uses a storage engine limited to statement-based logging.
Error number: 1665; Symbol: ER_BINLOG_STMT_MODE_AND_ROW_ENGINE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging.%s
Error number: 1666; Symbol: ER_BINLOG_ROW_INJECTION_AND_STMT_MODE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since statement is in row format and BINLOG_FORMAT = STATEMENT.
Error number: 1667; Symbol: ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
Error number: 1668; Symbol: ER_BINLOG_UNSAFE_LIMIT; SQLSTATE: HY000
Message: The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
Error number: 1669; Symbol: ER_BINLOG_UNSAFE_INSERT_DELAYED; SQLSTATE: HY000
Message: The statement is unsafe because it uses INSERT DELAYED. This is unsafe because the times when rows are inserted cannot be predicted.
Error number: 1670; Symbol: ER_BINLOG_UNSAFE_SYSTEM_TABLE; SQLSTATE: HY000
Message: The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
Error number: 1671; Symbol: ER_BINLOG_UNSAFE_AUTOINC_COLUMNS; SQLSTATE: HY000
Message: Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
Error number: 1672; Symbol: ER_BINLOG_UNSAFE_UDF; SQLSTATE: HY000
Message: Statement is unsafe because it uses a UDF which may not return the same value on the slave.
Error number: 1673; Symbol: ER_BINLOG_UNSAFE_SYSTEM_VARIABLE; SQLSTATE: HY000
Message: Statement is unsafe because it uses a system variable that may have a different value on the slave.
Error number: 1674; Symbol: ER_BINLOG_UNSAFE_SYSTEM_FUNCTION; SQLSTATE: HY000
Message: Statement is unsafe because it uses a system function that may return a different value on the slave.
Error number: 1675; Symbol: ER_BINLOG_UNSAFE_NONTRANS_AFTER_TRANS; SQLSTATE: HY000
Message: Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
Error number: 1676; Symbol: ER_MESSAGE_AND_STATEMENT; SQLSTATE: HY000
Message: %s Statement: %s
Error number: 1677; Symbol: ER_SLAVE_CONVERSION_FAILED; SQLSTATE: HY000
Message: Column %d of table '%s.%s' cannot be converted from type '%s' to type '%s'
Error number: 1678; Symbol: ER_SLAVE_CANT_CREATE_CONVERSION; SQLSTATE: HY000
Message: Can't create conversion table for table '%s.%s'
Error number: 1679; Symbol: ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_FORMAT; SQLSTATE: HY000
Message: Cannot modify @@session.binlog_format inside a transaction
Error number: 1680; Symbol: ER_PATH_LENGTH; SQLSTATE: HY000
Message: The path specified for %s is too long.
Error number: 1681; Symbol: ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT; SQLSTATE: HY000
Message: '%s' is deprecated and will be removed in a future release.
Error number: 1682; Symbol: ER_WRONG_NATIVE_TABLE_STRUCTURE; SQLSTATE: HY000
Message: Native table '%s'.'%s' has the wrong structure
Error number: 1683; Symbol: ER_WRONG_PERFSCHEMA_USAGE; SQLSTATE: HY000
Message: Invalid performance_schema usage.
Error number: 1684; Symbol: ER_WARN_I_S_SKIPPED_TABLE; SQLSTATE: HY000
Message: Table '%s'.'%s' was skipped since its definition is being modified by concurrent DDL statement
Error number: 1685; Symbol: ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_DIRECT; SQLSTATE: HY000
Message: Cannot modify @@session.binlog_direct_non_transactional_updates inside a transaction
Error number: 1686; Symbol: ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_DIRECT; SQLSTATE: HY000
Message: Cannot change the binlog direct flag inside a stored function or trigger
Error number: 1687; Symbol: ER_SPATIAL_MUST_HAVE_GEOM_COL; SQLSTATE: 42000
Message: A SPATIAL index may only contain a geometrical type column
Error number: 1688; Symbol: ER_TOO_LONG_INDEX_COMMENT; SQLSTATE: HY000
Message: Comment for index '%s' is too long (max = %lu)
Error number: 1689; Symbol: ER_LOCK_ABORTED; SQLSTATE: HY000
Message: Wait on a lock was aborted due to a pending exclusive lock
Error number: 1690; Symbol: ER_DATA_OUT_OF_RANGE; SQLSTATE: 22003
Message: %s value is out of range in '%s'
Error number: 1691; Symbol: ER_WRONG_SPVAR_TYPE_IN_LIMIT; SQLSTATE: HY000
Message: A variable of a non-integer based type in LIMIT clause
Error number: 1692; Symbol: ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE; SQLSTATE: HY000
Message: Mixing self-logging and non-self-logging engines in a statement is unsafe.
Error number: 1693; Symbol: ER_BINLOG_UNSAFE_MIXED_STATEMENT; SQLSTATE: HY000
Message: Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
Error number: 1694; Symbol: ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SQL_LOG_BIN; SQLSTATE: HY000
Message: Cannot modify @@session.sql_log_bin inside a transaction
Error number: 1695; Symbol: ER_STORED_FUNCTION_PREVENTS_SWITCH_SQL_LOG_BIN; SQLSTATE: HY000
Message: Cannot change the sql_log_bin inside a stored function or trigger
Error number: 1696; Symbol: ER_FAILED_READ_FROM_PAR_FILE; SQLSTATE: HY000
Message: Failed to read from the .par file
Error number: 1697; Symbol: ER_VALUES_IS_NOT_INT_TYPE_ERROR; SQLSTATE: HY000
Message: VALUES value for partition '%s' must have type INT
ER_VALUES_IS_NOT_INT_TYPE_ERROR was added in 5.6.1.
Error number: 1698; Symbol: ER_ACCESS_DENIED_NO_PASSWORD_ERROR; SQLSTATE: 28000
Message: Access denied for user '%s'@'%s'
ER_ACCESS_DENIED_NO_PASSWORD_ERROR was added in 5.6.1.
Error number: 1699; Symbol: ER_SET_PASSWORD_AUTH_PLUGIN; SQLSTATE: HY000
Message: SET PASSWORD has no significance for users authenticating via plugins
ER_SET_PASSWORD_AUTH_PLUGIN was added in 5.6.1.
Error number: 1700; Symbol: ER_GRANT_PLUGIN_USER_EXISTS; SQLSTATE: HY000
Message: GRANT with IDENTIFIED WITH is illegal because the user %-.*s already exists
ER_GRANT_PLUGIN_USER_EXISTS was added in 5.6.1.
Error number: 1701; Symbol: ER_TRUNCATE_ILLEGAL_FK; SQLSTATE: 42000
Message: Cannot truncate a table referenced in a foreign key constraint (%s)
ER_TRUNCATE_ILLEGAL_FK was added in 5.6.1.
Error number: 1702; Symbol: ER_PLUGIN_IS_PERMANENT; SQLSTATE: HY000
Message: Plugin '%s' is force_plus_permanent and can not be unloaded
ER_PLUGIN_IS_PERMANENT was added in 5.6.1.
Error number: 1703; Symbol: ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN; SQLSTATE: HY000
Message: The requested value for the heartbeat period is less than 1 millisecond. The value is reset to 0, meaning that heartbeating will effectively be disabled.
ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN was added in 5.6.1.
Error number: 1704; Symbol: ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX; SQLSTATE: HY000
Message: The requested value for the heartbeat period exceeds the value of `slave_net_timeout' seconds. A sensible value for the period should be less than the timeout.
ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX was added in 5.6.1.
Error number: 1705; Symbol: ER_STMT_CACHE_FULL; SQLSTATE: HY000
Message: Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again
ER_STMT_CACHE_FULL was added in 5.6.1.
Error number: 1706; Symbol: ER_MULTI_UPDATE_KEY_CONFLICT; SQLSTATE: HY000
Message: Primary key/partition key update is not allowed since the table is updated both as '%s' and '%s'.
ER_MULTI_UPDATE_KEY_CONFLICT was added in 5.6.2.
Error number: 1707; Symbol: ER_TABLE_NEEDS_REBUILD; SQLSTATE: HY000
Message: Table rebuild required. Please do "ALTER TABLE %s FORCE" or dump/reload to fix it! ER_TABLE_NEEDS_REBUILD was added in 5.6.3.
Error number: 1708; Symbol: WARN_OPTION_BELOW_LIMIT; SQLSTATE: HY000
Message: The value of '%s' should be no less than the value of '%s'
WARN_OPTION_BELOW_LIMIT was added in 5.6.3.
Error number: 1709; Symbol: ER_INDEX_COLUMN_TOO_LONG; SQLSTATE: HY000
Message: Index column size too large. The maximum column size is %lu bytes.
ER_INDEX_COLUMN_TOO_LONG was added in 5.6.3.
Error number: 1710; Symbol: ER_ERROR_IN_TRIGGER_BODY; SQLSTATE: HY000
Message: Trigger '%s' has an error in its body: '%s'
ER_ERROR_IN_TRIGGER_BODY was added in 5.6.3.
Error number: 1711; Symbol: ER_ERROR_IN_UNKNOWN_TRIGGER_BODY; SQLSTATE: HY000
Message: Unknown trigger has an error in its body: '%s'
ER_ERROR_IN_UNKNOWN_TRIGGER_BODY was added in 5.6.3.
Error number: 1712; Symbol: ER_INDEX_CORRUPT; SQLSTATE: HY000
Message: Index %s is corrupted
ER_INDEX_CORRUPT was added in 5.6.3.
Error number: 1713; Symbol: ER_UNDO_RECORD_TOO_BIG; SQLSTATE: HY000
Message: Undo log record is too big.
ER_UNDO_RECORD_TOO_BIG was added in 5.6.4.
Error number: 1714; Symbol: ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT; SQLSTATE: HY000
Message: INSERT IGNORE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT was added in 5.6.4.
Error number: 1715; Symbol: ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE; SQLSTATE: HY000
Message: INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are updated. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE was added in 5.6.4.
Error number: 1716; Symbol: ER_BINLOG_UNSAFE_REPLACE_SELECT; SQLSTATE: HY000
Message: REPLACE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_REPLACE_SELECT was added in 5.6.4.
Error number: 1717; Symbol: ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT; SQLSTATE: HY000
Message: CREATE... IGNORE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT was added in 5.6.4.
Error number: 1718; Symbol: ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT; SQLSTATE: HY000
Message: CREATE... REPLACE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT was added in 5.6.4.
Error number: 1719; Symbol: ER_BINLOG_UNSAFE_UPDATE_IGNORE; SQLSTATE: HY000
Message: UPDATE IGNORE is unsafe because the order in which rows are updated determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_UPDATE_IGNORE was added in 5.6.4.
Error number: 1720; Symbol: ER_PLUGIN_NO_UNINSTALL; SQLSTATE: HY000
Message: Plugin '%s' is marked as not dynamically uninstallable. You have to stop the server to uninstall it.
ER_PLUGIN_NO_UNINSTALL was added in 5.6.4.
Error number: 1721; Symbol: ER_CANT_LOCK_RPL_INFO_TABLE; SQLSTATE: HY000
Message: You can't use locks with rpl info tables.
ER_CANT_LOCK_RPL_INFO_TABLE was added in 5.6.1, removed after 5.6.3.
Error number: 1721; Symbol: ER_PLUGIN_NO_INSTALL; SQLSTATE: HY000
Message: Plugin '%s' is marked as not dynamically installable. You have to stop the server to install it.
ER_PLUGIN_NO_INSTALL was added in 5.6.4.
Error number: 1722; Symbol: ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT; SQLSTATE: HY000
Message: Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieved determines what (if any) rows will be written. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT was added in 5.6.5.
Error number: 1723; Symbol: ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC; SQLSTATE: HY000
Message: CREATE TABLE... SELECT... on a table with an auto-increment column is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are inserted. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC was added in 5.6.5.
Error number: 1724; Symbol: ER_BINLOG_UNSAFE_INSERT_TWO_KEYS; SQLSTATE: HY000
Message: INSERT... ON DUPLICATE KEY UPDATE on a table with more than one UNIQUE KEY is unsafe
ER_BINLOG_UNSAFE_INSERT_TWO_KEYS was added in 5.6.6.
Error number: 1725; Symbol: ER_TABLE_IN_FK_CHECK; SQLSTATE: HY000
Message: Table is being used in foreign key check.
ER_TABLE_IN_FK_CHECK was added in 5.6.6.
Error number: 1726; Symbol: ER_UNSUPPORTED_ENGINE; SQLSTATE: HY000
Message: Storage engine '%s' does not support system tables. [%s.%s]
ER_UNSUPPORTED_ENGINE was added in 5.6.6.
Error number: 1727; Symbol: ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST; SQLSTATE: HY000
Message: INSERT into autoincrement field which is not the first part in the composed primary key is unsafe.
ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST was added in 5.6.6.
Error number: 1728; Symbol: ER_CANNOT_LOAD_FROM_TABLE_V2; SQLSTATE: HY000
Message: Cannot load from %s.%s. The table is probably corrupted
Error number: 1729; Symbol: ER_MASTER_DELAY_VALUE_OUT_OF_RANGE; SQLSTATE: HY000
Message: The requested value %s for the master delay exceeds the maximum %u
Error number: 1730; Symbol: ER_ONLY_FD_AND_RBR_EVENTS_ALLOWED_IN_BINLOG_STATEMENT; SQLSTATE: HY000
Message: Only Format_description_log_event and row events are allowed in BINLOG statements (but %s was provided)
Error number: 1731; Symbol: ER_PARTITION_EXCHANGE_DIFFERENT_OPTION; SQLSTATE: HY000
Message: Non matching attribute '%s' between partition and table
Error number: 1732; Symbol: ER_PARTITION_EXCHANGE_PART_TABLE; SQLSTATE: HY000
Message: Table to exchange with partition is partitioned: '%s'
Error number: 1733; Symbol: ER_PARTITION_EXCHANGE_TEMP_TABLE; SQLSTATE: HY000
Message: Table to exchange with partition is temporary: '%s'
Error number: 1734; Symbol: ER_PARTITION_INSTEAD_OF_SUBPARTITION; SQLSTATE: HY000
Message: Subpartitioned table, use subpartition instead of partition
Error number: 1735; Symbol: ER_UNKNOWN_PARTITION; SQLSTATE: HY000
Message: Unknown partition '%s' in table '%s'
Error number: 1736; Symbol: ER_TABLES_DIFFERENT_METADATA; SQLSTATE: HY000
Message: Tables have different definitions
Error number: 1737; Symbol: ER_ROW_DOES_NOT_MATCH_PARTITION; SQLSTATE: HY000
Message: Found a row that does not match the partition
Error number: 1738; Symbol: ER_BINLOG_CACHE_SIZE_GREATER_THAN_MAX; SQLSTATE: HY000
Message: Option binlog_cache_size (%lu) is greater than max_binlog_cache_size (%lu); setting binlog_cache_size equal to max_binlog_cache_size.
ER_BINLOG_CACHE_SIZE_GREATER_THAN_MAX was added in 5.6.1.
Error number: 1739; Symbol: ER_WARN_INDEX_NOT_APPLICABLE; SQLSTATE: HY000
Message: Cannot use %s access on index '%s' due to type or collation conversion on field '%s'
ER_WARN_INDEX_NOT_APPLICABLE was added in 5.6.1.
Error number: 1740; Symbol: ER_PARTITION_EXCHANGE_FOREIGN_KEY; SQLSTATE: HY000
Message: Table to exchange with partition has foreign key references: '%s'
ER_PARTITION_EXCHANGE_FOREIGN_KEY was added in 5.6.1.
Error number: 1741; Symbol: ER_NO_SUCH_KEY_VALUE; SQLSTATE: HY000
Message: Key value '%s' was not found in table '%s.%s'
ER_NO_SUCH_KEY_VALUE was added in 5.6.1.
Error number: 1742; Symbol: ER_RPL_INFO_DATA_TOO_LONG; SQLSTATE: HY000
Message: Data for column '%s' too long
ER_RPL_INFO_DATA_TOO_LONG was added in 5.6.1.
Error number: 1743; Symbol: ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE; SQLSTATE: HY000
Message: Replication event checksum verification failed while reading from network.
ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE was added in 5.6.1.
Error number: 1744; Symbol: ER_BINLOG_READ_EVENT_CHECKSUM_FAILURE; SQLSTATE: HY000
Message: Replication event checksum verification failed while reading from a log file.
ER_BINLOG_READ_EVENT_CHECKSUM_FAILURE was added in 5.6.1.
Error number: 1745; Symbol: ER_BINLOG_STMT_CACHE_SIZE_GREATER_THAN_MAX; SQLSTATE: HY000
Message: Option binlog_stmt_cache_size (%lu) is greater than max_binlog_stmt_cache_size (%lu); setting binlog_stmt_cache_size equal to max_binlog_stmt_cache_size.
ER_BINLOG_STMT_CACHE_SIZE_GREATER_THAN_MAX was added in 5.6.1.
Error number: 1746; Symbol: ER_NO_SUCH_PARTITION; SQLSTATE: HY000
Message: partition '%s' doesn't exist
ER_NO_SUCH_PARTITION was added in 5.6.2, removed after 5.6.5.
Error number: 1746; Symbol: ER_CANT_UPDATE_TABLE_IN_CREATE_TABLE_SELECT; SQLSTATE: HY000
Message: Can't update table '%s' while '%s' is being created.
ER_CANT_UPDATE_TABLE_IN_CREATE_TABLE_SELECT was added in 5.6.2.
Error number: 1747; Symbol: ER_PARTITION_CLAUSE_ON_NONPARTITIONED; SQLSTATE: HY000
Message: PARTITION () clause on non partitioned table
ER_PARTITION_CLAUSE_ON_NONPARTITIONED was added in 5.6.2.
Error number: 1748; Symbol: ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET; SQLSTATE: HY000
Message: Found a row not matching the given partition set
ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET was added in 5.6.2.
Error number: 1749; Symbol: ER_NO_SUCH_PARTITION__UNUSED; SQLSTATE: HY000
Message: partition '%s' doesn't exist
ER_NO_SUCH_PARTITION__UNUSED was added in 5.6.6.
Error number: 1750; Symbol: ER_CHANGE_RPL_INFO_REPOSITORY_FAILURE; SQLSTATE: HY000
Message: Failure while changing the type of replication repository: %s.
ER_CHANGE_RPL_INFO_REPOSITORY_FAILURE was added in 5.6.3.
Error number: 1751; Symbol: ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_CREATED_TEMP_TABLE; SQLSTATE: HY000
Message: The creation of some temporary tables could not be rolled back.
ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_CREATED_TEMP_TABLE was added in 5.6.3.
Error number: 1752; Symbol: ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_DROPPED_TEMP_TABLE; SQLSTATE: HY000
Message: Some temporary tables were dropped, but these operations could not be rolled back.
ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_DROPPED_TEMP_TABLE was added in 5.6.3.
Error number: 1753; Symbol: ER_MTS_FEATURE_IS_NOT_SUPPORTED; SQLSTATE: HY000
Message: %s is not supported in multi-threaded slave mode. %s
ER_MTS_FEATURE_IS_NOT_SUPPORTED was added in 5.6.3.
Error number: 1754; Symbol: ER_MTS_UPDATED_DBS_GREATER_MAX; SQLSTATE: HY000
Message: The number of modified databases exceeds the maximum %d; the database names will not be included in the replication event metadata.
ER_MTS_UPDATED_DBS_GREATER_MAX was added in 5.6.3.
Error number: 1755; Symbol: ER_MTS_CANT_PARALLEL; SQLSTATE: HY000
Message: Cannot execute the current event group in the parallel mode. Encountered event %s, relay-log name %s, position %s which prevents execution of this event group in parallel mode. Reason: %s.
ER_MTS_CANT_PARALLEL was added in 5.6.3.
Error number: 1756; Symbol: ER_MTS_INCONSISTENT_DATA; SQLSTATE: HY000
Message: %s
ER_MTS_INCONSISTENT_DATA was added in 5.6.3.
Error number: 1757; Symbol: ER_FULLTEXT_NOT_SUPPORTED_WITH_PARTITIONING; SQLSTATE: HY000
Message: FULLTEXT index is not supported for partitioned tables.
ER_FULLTEXT_NOT_SUPPORTED_WITH_PARTITIONING was added in 5.6.4.
Error number: 1758; Symbol: ER_DA_INVALID_CONDITION_NUMBER; SQLSTATE: 35000
Message: Invalid condition number
ER_DA_INVALID_CONDITION_NUMBER was added in 5.6.4.
Error number: 1759; Symbol: ER_INSECURE_PLAIN_TEXT; SQLSTATE: HY000
Message: Sending passwords in plain text without SSL/TLS is extremely insecure.
ER_INSECURE_PLAIN_TEXT was added in 5.6.4.
Error number: 1760; Symbol: ER_INSECURE_CHANGE_MASTER; SQLSTATE: HY000
Message: Storing MySQL user name or password information in the master info repository is not secure and is therefore not recommended. Please consider using the USER and PASSWORD connection options for START SLAVE; see the 'START SLAVE Syntax' in the MySQL Manual for more information.
ER_INSECURE_CHANGE_MASTER was added in 5.6.4.
Error number: 1761; Symbol: ER_FOREIGN_DUPLICATE_KEY_WITH_CHILD_INFO; SQLSTATE: 23000
Message: Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in table '%s', key '%s'
ER_FOREIGN_DUPLICATE_KEY_WITH_CHILD_INFO was added in 5.6.4.
Error number: 1762; Symbol: ER_FOREIGN_DUPLICATE_KEY_WITHOUT_CHILD_INFO; SQLSTATE: 23000
Message: Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in a child table
ER_FOREIGN_DUPLICATE_KEY_WITHOUT_CHILD_INFO was added in 5.6.4.
Error number: 1763; Symbol: ER_SQLTHREAD_WITH_SECURE_SLAVE; SQLSTATE: HY000
Message: Setting authentication options is not possible when only the Slave SQL Thread is being started.
ER_SQLTHREAD_WITH_SECURE_SLAVE was added in 5.6.4.
Error number: 1764; Symbol: ER_TABLE_HAS_NO_FT; SQLSTATE: HY000
Message: The table does not have FULLTEXT index to support this query
ER_TABLE_HAS_NO_FT was added in 5.6.4.
Error number: 1765; Symbol: ER_VARIABLE_NOT_SETTABLE_IN_SF_OR_TRIGGER; SQLSTATE: HY000
Message: The system variable %s cannot be set in stored functions or triggers.
ER_VARIABLE_NOT_SETTABLE_IN_SF_OR_TRIGGER was added in 5.6.5.
Error number: 1766; Symbol: ER_VARIABLE_NOT_SETTABLE_IN_TRANSACTION; SQLSTATE: HY000
Message: The system variable %s cannot be set when there is an ongoing transaction.
ER_VARIABLE_NOT_SETTABLE_IN_TRANSACTION was added in 5.6.5.
Error number: 1767; Symbol: ER_GTID_NEXT_IS_NOT_IN_GTID_NEXT_LIST; SQLSTATE: HY000
Message: The system variable @@SESSION.GTID_NEXT has the value %s, which is not listed in @@SESSION.GTID_NEXT_LIST.
ER_GTID_NEXT_IS_NOT_IN_GTID_NEXT_LIST was added in 5.6.5.
Error number: 1768; Symbol: ER_CANT_CHANGE_GTID_NEXT_IN_TRANSACTION_WHEN_GTID_NEXT_LIST_IS_NULL; SQLSTATE: HY000
Message: The system variable @@SESSION.GTID_NEXT cannot change inside a transaction.
ER_CANT_CHANGE_GTID_NEXT_IN_TRANSACTION_WHEN_GTID_NEXT_LIST_IS_NULL was added in 5.6.5.
Error number: 1769; Symbol: ER_SET_STATEMENT_CANNOT_INVOKE_FUNCTION; SQLSTATE: HY000
Message: The statement 'SET %s' cannot invoke a stored function.
ER_SET_STATEMENT_CANNOT_INVOKE_FUNCTION was added in 5.6.5.
Error number: 1770; Symbol: ER_GTID_NEXT_CANT_BE_AUTOMATIC_IF_GTID_NEXT_LIST_IS_NON_NULL; SQLSTATE: HY000
Message: The system variable @@SESSION.GTID_NEXT cannot be 'AUTOMATIC' when @@SESSION.GTID_NEXT_LIST is non-NULL.
ER_GTID_NEXT_CANT_BE_AUTOMATIC_IF_GTID_NEXT_LIST_IS_NON_NULL was added in 5.6.5.
Error number: 1771; Symbol: ER_SKIPPING_LOGGED_TRANSACTION; SQLSTATE: HY000
Message: Skipping transaction %s because it has already been executed and logged.
ER_SKIPPING_LOGGED_TRANSACTION was added in 5.6.5.
Error number: 1772; Symbol: ER_MALFORMED_GTID_SET_SPECIFICATION; SQLSTATE: HY000
Message: Malformed GTID set specification '%s'.
ER_MALFORMED_GTID_SET_SPECIFICATION was added in 5.6.5.
Error number: 1773; Symbol: ER_MALFORMED_GTID_SET_ENCODING; SQLSTATE: HY000
Message: Malformed GTID set encoding.
ER_MALFORMED_GTID_SET_ENCODING was added in 5.6.5.
Error number: 1774; Symbol: ER_MALFORMED_GTID_SPECIFICATION; SQLSTATE: HY000
Message: Malformed GTID specification '%s'.
ER_MALFORMED_GTID_SPECIFICATION was added in 5.6.5.
Error number: 1775; Symbol: ER_GNO_EXHAUSTED; SQLSTATE: HY000
Message: Impossible to generate Global Transaction Identifier: the integer component reached the maximal value. Restart the server with a new server_uuid.
ER_GNO_EXHAUSTED was added in 5.6.5.
Error number: 1776; Symbol: ER_BAD_SLAVE_AUTO_POSITION; SQLSTATE: HY000
Message: Parameters MASTER_LOG_FILE, MASTER_LOG_POS, RELAY_LOG_FILE and RELAY_LOG_POS cannot be set when MASTER_AUTO_POSITION is active.
ER_BAD_SLAVE_AUTO_POSITION was added in 5.6.5.
Error number: 1777; Symbol: ER_AUTO_POSITION_REQUIRES_GTID_MODE_ON; SQLSTATE: HY000
Message: CHANGE MASTER TO MASTER_AUTO_POSITION = 1 can only be executed when @@GLOBAL.GTID_MODE = ON.
ER_AUTO_POSITION_REQUIRES_GTID_MODE_ON was added in 5.6.5.
Error number: 1778; Symbol: ER_CANT_DO_IMPLICIT_COMMIT_IN_TRX_WHEN_GTID_NEXT_IS_SET; SQLSTATE: HY000
Message: Cannot execute statements with implicit commit inside a transaction when @@SESSION.GTID_NEXT != AUTOMATIC.
ER_CANT_DO_IMPLICIT_COMMIT_IN_TRX_WHEN_GTID_NEXT_IS_SET was added in 5.6.5.
Error number: 1779; Symbol: ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ON; SQLSTATE: HY000
Message: GTID_MODE = ON or GTID_MODE = UPGRADE_STEP_2 requires DISABLE_GTID_UNSAFE_STATEMENTS = 1.
In 5.6.9: ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ON was renamed to ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON.
ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ON was added in 5.6.5, removed after 5.6.8.
Error number: 1779; Symbol: ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON; SQLSTATE: HY000
Message: @@GLOBAL.GTID_MODE = ON or UPGRADE_STEP_2 requires @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1.
In 5.6.9: ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ON was renamed to ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON.
ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON was added in 5.6.9.
Error number: 1780; Symbol: ER_GTID_MODE_REQUIRES_BINLOG; SQLSTATE: HY000
Message: @@GLOBAL.GTID_MODE = ON or UPGRADE_STEP_1 or UPGRADE_STEP_2 requires --log-bin and --log-slave-updates.
ER_GTID_MODE_REQUIRES_BINLOG was added in 5.6.5.
Error number: 1781; Symbol: ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFF; SQLSTATE: HY000
Message: @@SESSION.GTID_NEXT cannot be set to UUID:NUMBER when @@GLOBAL.GTID_MODE = OFF.
ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFF was added in 5.6.5.
Error number: 1782; Symbol: ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ON; SQLSTATE: HY000
Message: @@SESSION.GTID_NEXT cannot be set to ANONYMOUS when @@GLOBAL.GTID_MODE = ON.
ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ON was added in 5.6.5.
Error number: 1783; Symbol: ER_CANT_SET_GTID_NEXT_LIST_TO_NON_NULL_WHEN_GTID_MODE_IS_OFF; SQLSTATE: HY000
Message: @@SESSION.GTID_NEXT_LIST cannot be set to a non-NULL value when @@GLOBAL.GTID_MODE = OFF.
ER_CANT_SET_GTID_NEXT_LIST_TO_NON_NULL_WHEN_GTID_MODE_IS_OFF was added in 5.6.5.
Error number: 1784; Symbol: ER_FOUND_GTID_EVENT_WHEN_GTID_MODE_IS_OFF; SQLSTATE: HY000
Message: Found a Gtid_log_event or Previous_gtids_log_event when @@GLOBAL.GTID_MODE = OFF.
ER_FOUND_GTID_EVENT_WHEN_GTID_MODE_IS_OFF was added in 5.6.5.
Error number: 1785; Symbol: ER_GTID_UNSAFE_NON_TRANSACTIONAL_TABLE; SQLSTATE: HY000
Message: When @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1, updates to non-transactional tables can only be done in either autocommitted statements or single-statement transactions, and never in the same statement as updates to transactional tables.
ER_GTID_UNSAFE_NON_TRANSACTIONAL_TABLE was added in 5.6.5.
Error number: 1786; Symbol: ER_GTID_UNSAFE_CREATE_SELECT; SQLSTATE: HY000
Message: CREATE TABLE ... SELECT is forbidden when @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1.
ER_GTID_UNSAFE_CREATE_SELECT was added in 5.6.5.
Error number: 1787; Symbol: ER_GTID_UNSAFE_CREATE_DROP_TEMPORARY_TABLE_IN_TRANSACTION; SQLSTATE: HY000
Message: When @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1, the statements CREATE TEMPORARY TABLE and DROP TEMPORARY TABLE can be executed in a non-transactional context only, and require that AUTOCOMMIT = 1. These statements are also not allowed in a function or trigger because functions and triggers are also considered to be multi-statement transactions.
ER_GTID_UNSAFE_CREATE_DROP_TEMPORARY_TABLE_IN_TRANSACTION was added in 5.6.5.
Error number: 1788; Symbol: ER_GTID_MODE_CAN_ONLY_CHANGE_ONE_STEP_AT_A_TIME; SQLSTATE: HY000
Message: The value of @@GLOBAL.GTID_MODE can only change one step at a time: OFF <-> UPGRADE_STEP_1 <-> UPGRADE_STEP_2 <-> ON. Also note that this value must be stepped up or down simultaneously on all servers; see the Manual for instructions.
ER_GTID_MODE_CAN_ONLY_CHANGE_ONE_STEP_AT_A_TIME was added in 5.6.5.
Error number: 1789; Symbol: ER_MASTER_HAS_PURGED_REQUIRED_GTIDS; SQLSTATE: HY000
Message: The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master has purged binary logs containing GTIDs that the slave requires. Replicate the missing transactions from elsewhere, or provision a new slave from backup. Consider increasing the master's binary log expiration period. %s.
ER_MASTER_HAS_PURGED_REQUIRED_GTIDS was added in 5.6.5.
Error number: 1790; Symbol: ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTID; SQLSTATE: HY000
Message: @@SESSION.GTID_NEXT cannot be changed by a client that owns a GTID. The client owns %s. Ownership is released on COMMIT or ROLLBACK.
ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTID was added in 5.6.5.
Error number: 1791; Symbol: ER_UNKNOWN_EXPLAIN_FORMAT; SQLSTATE: HY000
Message: Unknown EXPLAIN format name: '%s'
ER_UNKNOWN_EXPLAIN_FORMAT was added in 5.6.5.
Error number: 1792; Symbol: ER_CANT_EXECUTE_IN_READ_ONLY_TRANSACTION; SQLSTATE: 25006
Message: Cannot execute statement in a READ ONLY transaction.
ER_CANT_EXECUTE_IN_READ_ONLY_TRANSACTION was added in 5.6.5.
Error number: 1793; Symbol: ER_TOO_LONG_TABLE_PARTITION_COMMENT; SQLSTATE: HY000
Message: Comment for table partition '%s' is too long (max = %lu)
ER_TOO_LONG_TABLE_PARTITION_COMMENT was added in 5.6.6.
Error number: 1794; Symbol: ER_SLAVE_CONFIGURATION; SQLSTATE: HY000
Message: Slave is not configured or failed to initialize properly. You must at least set --server-id to enable either a master or a slave. Additional error messages can be found in the MySQL error log.
ER_SLAVE_CONFIGURATION was added in 5.6.6.
Error number: 1795; Symbol: ER_INNODB_FT_LIMIT; SQLSTATE: HY000
Message: InnoDB presently supports one FULLTEXT index creation at a time
ER_INNODB_FT_LIMIT was added in 5.6.4.
Error number: 1796; Symbol: ER_INNODB_NO_FT_TEMP_TABLE; SQLSTATE: HY000
Message: Cannot create FULLTEXT index on temporary InnoDB table
ER_INNODB_NO_FT_TEMP_TABLE was added in 5.6.4.
Error number: 1797; Symbol: ER_INNODB_FT_WRONG_DOCID_COLUMN; SQLSTATE: HY000
Message: Column '%s' is of wrong type for an InnoDB FULLTEXT index
ER_INNODB_FT_WRONG_DOCID_COLUMN was added in 5.6.6.
Error number: 1798; Symbol: ER_INNODB_FT_WRONG_DOCID_INDEX; SQLSTATE: HY000
Message: Index '%s' is of wrong type for an InnoDB FULLTEXT index
ER_INNODB_FT_WRONG_DOCID_INDEX was added in 5.6.6.
Error number: 1799; Symbol: ER_INNODB_ONLINE_LOG_TOO_BIG; SQLSTATE: HY000
Message: Creating index '%s' required more than 'innodb_online_alter_log_max_size' bytes of modification log. Please try again.
ER_INNODB_ONLINE_LOG_TOO_BIG was added in 5.6.6.
Error number: 1800; Symbol: ER_UNKNOWN_ALTER_ALGORITHM; SQLSTATE: HY000
Message: Unknown ALGORITHM '%s'
ER_UNKNOWN_ALTER_ALGORITHM was added in 5.6.6.
Error number: 1801; Symbol: ER_UNKNOWN_ALTER_LOCK; SQLSTATE: HY000
Message: Unknown LOCK type '%s'
ER_UNKNOWN_ALTER_LOCK was added in 5.6.6.
Error number: 1802; Symbol: ER_MTS_CHANGE_MASTER_CANT_RUN_WITH_GAPS; SQLSTATE: HY000
Message: CHANGE MASTER cannot be executed when the slave was stopped with an error or killed in MTS mode. Consider using RESET SLAVE or START SLAVE UNTIL.
ER_MTS_CHANGE_MASTER_CANT_RUN_WITH_GAPS was added in 5.6.6.
Error number: 1803; Symbol: ER_MTS_RECOVERY_FAILURE; SQLSTATE: HY000
Message: Cannot recover after SLAVE errored out in parallel execution mode. Additional error messages can be found in the MySQL error log.
ER_MTS_RECOVERY_FAILURE was added in 5.6.6.
Error number: 1804; Symbol: ER_MTS_RESET_WORKERS; SQLSTATE: HY000
Message: Cannot clean up worker info tables. Additional error messages can be found in the MySQL error log.
ER_MTS_RESET_WORKERS was added in 5.6.6.
Error number: 1805; Symbol: ER_COL_COUNT_DOESNT_MATCH_CORRUPTED_V2; SQLSTATE: HY000
Message: Column count of %s.%s is wrong. Expected %d, found %d. The table is probably corrupted
Error number: 1806; Symbol: ER_SLAVE_SILENT_RETRY_TRANSACTION; SQLSTATE: HY000
Message: Slave must silently retry current transaction
ER_SLAVE_SILENT_RETRY_TRANSACTION was added in 5.6.6.
Error number: 1807; Symbol: ER_DISCARD_FK_CHECKS_RUNNING; SQLSTATE: HY000
Message: There is a foreign key check running on table '%s'. Cannot discard the table.
ER_DISCARD_FK_CHECKS_RUNNING was added in 5.6.6.
Error number: 1808; Symbol: ER_TABLE_SCHEMA_MISMATCH; SQLSTATE: HY000
Message: Schema mismatch (%s)
ER_TABLE_SCHEMA_MISMATCH was added in 5.6.6.
Error number: 1809; Symbol: ER_TABLE_IN_SYSTEM_TABLESPACE; SQLSTATE: HY000
Message: Table '%s' in system tablespace
ER_TABLE_IN_SYSTEM_TABLESPACE was added in 5.6.6.
Error number: 1810; Symbol: ER_IO_READ_ERROR; SQLSTATE: HY000
Message: IO Read error: (%lu, %s) %s
ER_IO_READ_ERROR was added in 5.6.6.
Error number: 1811; Symbol: ER_IO_WRITE_ERROR; SQLSTATE: HY000
Message: IO Write error: (%lu, %s) %s
ER_IO_WRITE_ERROR was added in 5.6.6.
Error number: 1812; Symbol: ER_TABLESPACE_MISSING; SQLSTATE: HY000
Message: Tablespace is missing for table '%s'
ER_TABLESPACE_MISSING was added in 5.6.6.
Error number: 1813; Symbol: ER_TABLESPACE_EXISTS; SQLSTATE: HY000
Message: Tablespace for table '%s' exists. Please DISCARD the tablespace before IMPORT.
ER_TABLESPACE_EXISTS was added in 5.6.6.
Error number: 1814; Symbol: ER_TABLESPACE_DISCARDED; SQLSTATE: HY000
Message: Tablespace has been discarded for table '%s'
ER_TABLESPACE_DISCARDED was added in 5.6.6.
Error number: 1815; Symbol: ER_INTERNAL_ERROR; SQLSTATE: HY000
Message: Internal error: %s
ER_INTERNAL_ERROR was added in 5.6.6.
Error number: 1816; Symbol: ER_INNODB_IMPORT_ERROR; SQLSTATE: HY000
Message: ALTER TABLE '%s' IMPORT TABLESPACE failed with error %lu : '%s'
ER_INNODB_IMPORT_ERROR was added in 5.6.6.
Error number: 1817; Symbol: ER_INNODB_INDEX_CORRUPT; SQLSTATE: HY000
Message: Index corrupt: %s
ER_INNODB_INDEX_CORRUPT was added in 5.6.6.
Error number: 1818; Symbol: ER_INVALID_YEAR_COLUMN_LENGTH; SQLSTATE: HY000
Message: YEAR(%lu) column type is deprecated. Creating YEAR(4) column instead.
ER_INVALID_YEAR_COLUMN_LENGTH was added in 5.6.6.
Error number: 1819; Symbol: ER_NOT_VALID_PASSWORD; SQLSTATE: HY000
Message: Your password does not satisfy the current policy requirements
ER_NOT_VALID_PASSWORD was added in 5.6.6.
Error number: 1820; Symbol: ER_MUST_CHANGE_PASSWORD; SQLSTATE: HY000
Message: You must SET PASSWORD before executing this statement
ER_MUST_CHANGE_PASSWORD was added in 5.6.6.
Error number: 1821; Symbol: ER_FK_NO_INDEX_CHILD; SQLSTATE: HY000
Message: Failed to add the foreign key constaint. Missing index for constraint '%s' in the foreign table '%s'
ER_FK_NO_INDEX_CHILD was added in 5.6.6.
Error number: 1822; Symbol: ER_FK_NO_INDEX_PARENT; SQLSTATE: HY000
Message: Failed to add the foreign key constaint. Missing index for constraint '%s' in the referenced table '%s'
ER_FK_NO_INDEX_PARENT was added in 5.6.6.
Error number: 1823; Symbol: ER_FK_FAIL_ADD_SYSTEM; SQLSTATE: HY000
Message: Failed to add the foreign key constraint '%s' to system tables
ER_FK_FAIL_ADD_SYSTEM was added in 5.6.6.
Error number: 1824; Symbol: ER_FK_CANNOT_OPEN_PARENT; SQLSTATE: HY000
Message: Failed to open the referenced table '%s'
ER_FK_CANNOT_OPEN_PARENT was added in 5.6.6.
Error number: 1825; Symbol: ER_FK_INCORRECT_OPTION; SQLSTATE: HY000
Message: Failed to add the foreign key constraint on table '%s'. Incorrect options in FOREIGN KEY constraint '%s'
ER_FK_INCORRECT_OPTION was added in 5.6.6.
Error number: 1826; Symbol: ER_FK_DUP_NAME; SQLSTATE: HY000
Message: Duplicate foreign key constraint name '%s'
ER_FK_DUP_NAME was added in 5.6.6.
Error number: 1827; Symbol: ER_PASSWORD_FORMAT; SQLSTATE: HY000
Message: The password hash doesn't have the expected format. Check if the correct password algorithm is being used with the PASSWORD() function.
ER_PASSWORD_FORMAT was added in 5.6.6.
Error number: 1828; Symbol: ER_FK_COLUMN_CANNOT_DROP; SQLSTATE: HY000
Message: Cannot drop column '%s': needed in a foreign key constraint '%s'
ER_FK_COLUMN_CANNOT_DROP was added in 5.6.6.
Error number: 1829; Symbol: ER_FK_COLUMN_CANNOT_DROP_CHILD; SQLSTATE: HY000
Message: Cannot drop column '%s': needed in a foreign key constraint '%s' of table '%s'
ER_FK_COLUMN_CANNOT_DROP_CHILD was added in 5.6.6.
Error number: 1830; Symbol: ER_FK_COLUMN_NOT_NULL; SQLSTATE: HY000
Message: Column '%s' cannot be NOT NULL: needed in a foreign key constraint '%s' SET NULL
ER_FK_COLUMN_NOT_NULL was added in 5.6.6.
Error number: 1831; Symbol: ER_DUP_INDEX; SQLSTATE: HY000
Message: Duplicate index '%s' defined on the table '%s.%s'. This is deprecated and will be disallowed in a future release.
ER_DUP_INDEX was added in 5.6.7.
Error number: 1832; Symbol: ER_FK_COLUMN_CANNOT_CHANGE; SQLSTATE: HY000
Message: Cannot change column '%s': used in a foreign key constraint '%s'
ER_FK_COLUMN_CANNOT_CHANGE was added in 5.6.7.
Error number: 1833; Symbol: ER_FK_COLUMN_CANNOT_CHANGE_CHILD; SQLSTATE: HY000
Message: Cannot change column '%s': used in a foreign key constraint '%s' of table '%s'
ER_FK_COLUMN_CANNOT_CHANGE_CHILD was added in 5.6.7.
Error number: 1834; Symbol: ER_FK_CANNOT_DELETE_PARENT; SQLSTATE: HY000
Message: Cannot delete rows from table which is parent in a foreign key constraint '%s' of table '%s'
ER_FK_CANNOT_DELETE_PARENT was added in 5.6.7.
Error number: 1835; Symbol: ER_MALFORMED_PACKET; SQLSTATE: HY000
Message: Malformed communication packet.
ER_MALFORMED_PACKET was added in 5.6.7.
Error number: 1836; Symbol: ER_READ_ONLY_MODE; SQLSTATE: HY000
Message: Running in read-only mode
ER_READ_ONLY_MODE was added in 5.6.8.
Error number: 1837; Symbol: ER_GTID_NEXT_TYPE_UNDEFINED_GROUP; SQLSTATE: HY000
Message: When @@SESSION.GTID_NEXT is set to a GTID, you must explicitly set it to a different value after a COMMIT or ROLLBACK. Please check GTID_NEXT variable manual page for detailed explanation. Current @@SESSION.GTID_NEXT is '%s'.
ER_GTID_NEXT_TYPE_UNDEFINED_GROUP was added in 5.6.9.
Error number: 1838; Symbol: ER_VARIABLE_NOT_SETTABLE_IN_SP; SQLSTATE: HY000
Message: The system variable %s cannot be set in stored procedures.
ER_VARIABLE_NOT_SETTABLE_IN_SP was added in 5.6.9.
Error number: 1839; Symbol: ER_CANT_SET_GTID_PURGED_WHEN_GTID_MODE_IS_OFF; SQLSTATE: HY000
Message: @@GLOBAL.GTID_PURGED can only be set when @@GLOBAL.GTID_MODE = ON.
ER_CANT_SET_GTID_PURGED_WHEN_GTID_MODE_IS_OFF was added in 5.6.9.
Error number: 1840; Symbol: ER_CANT_SET_GTID_PURGED_WHEN_GTID_EXECUTED_IS_NOT_EMPTY; SQLSTATE: HY000
Message: @@GLOBAL.GTID_PURGED can only be set when @@GLOBAL.GTID_EXECUTED is empty.
ER_CANT_SET_GTID_PURGED_WHEN_GTID_EXECUTED_IS_NOT_EMPTY was added in 5.6.9.
Error number: 1841; Symbol: ER_CANT_SET_GTID_PURGED_WHEN_OWNED_GTIDS_IS_NOT_EMPTY; SQLSTATE: HY000
Message: @@GLOBAL.GTID_PURGED can only be set when there are no ongoing transactions (not even in other clients).
ER_CANT_SET_GTID_PURGED_WHEN_OWNED_GTIDS_IS_NOT_EMPTY was added in 5.6.9.
Error number: 1842; Symbol: ER_GTID_PURGED_WAS_CHANGED; SQLSTATE: HY000
Message: @@GLOBAL.GTID_PURGED was changed from '%s' to '%s'.
ER_GTID_PURGED_WAS_CHANGED was added in 5.6.9.
Error number: 1843; Symbol: ER_GTID_EXECUTED_WAS_CHANGED; SQLSTATE: HY000
Message: @@GLOBAL.GTID_EXECUTED was changed from '%s' to '%s'.
ER_GTID_EXECUTED_WAS_CHANGED was added in 5.6.9.
Error number: 1844; Symbol: ER_BINLOG_STMT_MODE_AND_NO_REPL_TABLES; SQLSTATE: HY000
Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT, and both replicated and non replicated tables are written to.
ER_BINLOG_STMT_MODE_AND_NO_REPL_TABLES was added in 5.6.9.
Error number: 1845; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED; SQLSTATE: 0A000
Message: %s is not supported for this operation. Try %s.
ER_ALTER_OPERATION_NOT_SUPPORTED was added in 5.6.10.
Error number: 1846; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON; SQLSTATE: 0A000
Message: %s is not supported. Reason: %s. Try %s.
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON was added in 5.6.10.
Error number: 1847; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COPY; SQLSTATE: HY000
Message: COPY algorithm requires a lock
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COPY was added in 5.6.10.
Error number: 1848; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_PARTITION; SQLSTATE: HY000
Message: Partition specific operations do not yet support LOCK/ALGORITHM
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_PARTITION was added in 5.6.10.
Error number: 1849; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_RENAME; SQLSTATE: HY000
Message: Columns participating in a foreign key are renamed
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_RENAME was added in 5.6.10.
Error number: 1850; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COLUMN_TYPE; SQLSTATE: HY000
Message: Cannot change column type INPLACE
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COLUMN_TYPE was added in 5.6.10.
Error number: 1851; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_CHECK; SQLSTATE: HY000
Message: Adding foreign keys needs foreign_key_checks=OFF
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_CHECK was added in 5.6.10.
Error number: 1852; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_IGNORE; SQLSTATE: HY000
Message: Creating unique indexes with IGNORE requires COPY algorithm to remove duplicate rows
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_IGNORE was added in 5.6.10.
Error number: 1853; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOPK; SQLSTATE: HY000
Message: Dropping a primary key is not allowed without also adding a new primary key
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOPK was added in 5.6.10.
Error number: 1854; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINC; SQLSTATE: HY000
Message: Adding an auto-increment column requires a lock
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINC was added in 5.6.10.
Error number: 1855; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_HIDDEN_FTS; SQLSTATE: HY000
Message: Cannot replace hidden FTS_DOC_ID with a user-visible one
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_HIDDEN_FTS was added in 5.6.10.
Error number: 1856; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_CHANGE_FTS; SQLSTATE: HY000
Message: Cannot drop or rename FTS_DOC_ID
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_CHANGE_FTS was added in 5.6.10.
Error number: 1857; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FTS; SQLSTATE: HY000
Message: Fulltext index creation requires a lock
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FTS was added in 5.6.10.
Error number: 1858; Symbol: ER_SQL_SLAVE_SKIP_COUNTER_NOT_SETTABLE_IN_GTID_MODE; SQLSTATE: HY000
Message: sql_slave_skip_counter can not be set when the server is running with @@GLOBAL.GTID_MODE = ON. Instead, for each transaction that you want to skip, generate an empty transaction with the same GTID as the transaction
ER_SQL_SLAVE_SKIP_COUNTER_NOT_SETTABLE_IN_GTID_MODE was added in 5.6.10.
Error number: 1859; Symbol: ER_DUP_UNKNOWN_IN_INDEX; SQLSTATE: 23000
Message: Duplicate entry for key '%s'
ER_DUP_UNKNOWN_IN_INDEX was added in 5.6.10.
Error number: 1860; Symbol: ER_IDENT_CAUSES_TOO_LONG_PATH; SQLSTATE: HY000
Message: Long database name and identifier for object resulted in path length exceeding %d characters. Path: '%s'.
ER_IDENT_CAUSES_TOO_LONG_PATH was added in 5.6.10.
Error number: 1861; Symbol: ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOT_NULL; SQLSTATE: HY000
Message: cannot silently convert NULL values, as required in this SQL_MODE
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOT_NULL was added in 5.6.10.
Error number: 1862; Symbol: ER_MUST_CHANGE_PASSWORD_LOGIN; SQLSTATE: HY000
Message: Your password has expired. To log in you must change it using a client that supports expired passwords.
ER_MUST_CHANGE_PASSWORD_LOGIN was added in 5.6.11.
Error number: 1863; Symbol: ER_ROW_IN_WRONG_PARTITION; SQLSTATE: HY000
Message: Found a row in wrong partition %s
ER_ROW_IN_WRONG_PARTITION was added in 5.6.11.
Error number: 1864; Symbol: ER_MTS_EVENT_BIGGER_PENDING_JOBS_SIZE_MAX; SQLSTATE: HY000
Message: Cannot schedule event %s, relay-log name %s, position %s to Worker thread because its size %lu exceeds %lu of slave_pending_jobs_size_max.
ER_MTS_EVENT_BIGGER_PENDING_JOBS_SIZE_MAX was added in 5.6.12.
Error number: 1865; Symbol: ER_INNODB_NO_FT_USES_PARSER; SQLSTATE: HY000
Message: Cannot CREATE FULLTEXT INDEX WITH PARSER on InnoDB table
ER_INNODB_NO_FT_USES_PARSER was added in 5.6.12.
Error number: 1866; Symbol: ER_BINLOG_LOGICAL_CORRUPTION; SQLSTATE: HY000
Message: The binary log file '%s' is logically corrupted: %s
ER_BINLOG_LOGICAL_CORRUPTION was added in 5.6.12.
Error number: 1867; Symbol: ER_WARN_PURGE_LOG_IN_USE; SQLSTATE: HY000
Message: file %s was not purged because it was being read by %d thread(s), purged only %d out of %d files.
ER_WARN_PURGE_LOG_IN_USE was added in 5.6.12.
Error number: 1868; Symbol: ER_WARN_PURGE_LOG_IS_ACTIVE; SQLSTATE: HY000
Message: file %s was not purged because it is the active log file.
ER_WARN_PURGE_LOG_IS_ACTIVE was added in 5.6.12.
Error number: 1869; Symbol: ER_AUTO_INCREMENT_CONFLICT; SQLSTATE: HY000
Message: Auto-increment value in UPDATE conflicts with internally generated values
ER_AUTO_INCREMENT_CONFLICT was added in 5.6.12.
Error number: 1870; Symbol: WARN_ON_BLOCKHOLE_IN_RBR; SQLSTATE: HY000
Message: Row events are not logged for %s statements that modify BLACKHOLE tables in row format. Table(s): '%s'
WARN_ON_BLOCKHOLE_IN_RBR was added in 5.6.12.
Error number: 1871; Symbol: ER_SLAVE_MI_INIT_REPOSITORY; SQLSTATE: HY000
Message: Slave failed to initialize master info structure from the repository
ER_SLAVE_MI_INIT_REPOSITORY was added in 5.6.12.
Error number: 1872; Symbol: ER_SLAVE_RLI_INIT_REPOSITORY; SQLSTATE: HY000
Message: Slave failed to initialize relay log info structure from the repository
ER_SLAVE_RLI_INIT_REPOSITORY was added in 5.6.12.
Error number: 1873; Symbol: ER_ACCESS_DENIED_CHANGE_USER_ERROR; SQLSTATE: 28000
Message: Access denied trying to change to user '%s'@'%s' (using password: %s). Disconnecting.
ER_ACCESS_DENIED_CHANGE_USER_ERROR was added in 5.6.13.
Error number: 1874; Symbol: ER_INNODB_READ_ONLY; SQLSTATE: HY000
Message: InnoDB is in read only mode.
ER_INNODB_READ_ONLY was added in 5.6.13.
Error number: 1875; Symbol: ER_STOP_SLAVE_SQL_THREAD_TIMEOUT; SQLSTATE: HY000
Message: STOP SLAVE command execution is incomplete: Slave SQL thread got the stop signal, thread is busy, SQL thread will stop once the current task is complete.
ER_STOP_SLAVE_SQL_THREAD_TIMEOUT was added in 5.6.13.
Error number: 1876; Symbol: ER_STOP_SLAVE_IO_THREAD_TIMEOUT; SQLSTATE: HY000
Message: STOP SLAVE command execution is incomplete: Slave IO thread got the stop signal, thread is busy, IO thread will stop once the current task is complete.
ER_STOP_SLAVE_IO_THREAD_TIMEOUT was added in 5.6.13.
Error number: 1877; Symbol: ER_TABLE_CORRUPT; SQLSTATE: HY000
Message: Operation cannot be performed. The table '%s.%s' is missing, corrupt or contains bad data.
ER_TABLE_CORRUPT was added in 5.6.14.
Error number: 1878; Symbol: ER_TEMP_FILE_WRITE_FAILURE; SQLSTATE: HY000
Message: Temporary file write failure.
ER_TEMP_FILE_WRITE_FAILURE was added in 5.6.15.
Error number: 1879; Symbol: ER_INNODB_FT_AUX_NOT_HEX_ID; SQLSTATE: HY000
Message: Upgrade index name failed, please use create index(alter table) algorithm copy to rebuild index.
ER_INNODB_FT_AUX_NOT_HEX_ID was added in 5.6.16.
Error number: 1880; Symbol: ER_OLD_TEMPORALS_UPGRADED; SQLSTATE: HY000
Message: TIME/TIMESTAMP/DATETIME columns of old format have been upgraded to the new format.
ER_OLD_TEMPORALS_UPGRADED was added in 5.6.16.
Error number: 1881; Symbol: ER_INNODB_FORCED_RECOVERY; SQLSTATE: HY000
Message: Operation not allowed when innodb_forced_recovery > 0.
ER_INNODB_FORCED_RECOVERY was added in 5.6.16.
Error number: 1882; Symbol: ER_AES_INVALID_IV; SQLSTATE: HY000
Message: The initialization vector supplied to %s is too short. Must be at least %d bytes long
ER_AES_INVALID_IV was added in 5.6.17.
Error number: 1883; Symbol: ER_PLUGIN_CANNOT_BE_UNINSTALLED; SQLSTATE: HY000
Message: Plugin '%s' cannot be uninstalled now. %s
ER_PLUGIN_CANNOT_BE_UNINSTALLED was added in 5.6.20.
Error number: 1884; Symbol: ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP; SQLSTATE: HY000
Message: Cannot execute statement because it needs to be written to the binary log as multiple statements, and this is not allowed when @@SESSION.GTID_NEXT == 'UUID:NUMBER'.
ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP was added in 5.6.20.
Error number: 1885; Symbol: ER_SLAVE_HAS_MORE_GTIDS_THAN_MASTER; SQLSTATE: HY000
Message: Slave has more GTIDs than the master has, using the master's SERVER_UUID. This may indicate that the end of the binary log was truncated or that the last binary log file was lost, e.g., after a power or disk failure when sync_binlog != 1. The master may or may not have rolled back transactions that were already replicated to the slave. Suggest to replicate any transactions that master has rolled back from slave to master, and/or commit empty transactions on master to account for transactions that have been committed on master but are not included in GTID_EXECUTED.
ER_SLAVE_HAS_MORE_GTIDS_THAN_MASTER was added in 5.6.23.
Error number: 1886; Symbol: ER_MISSING_KEY; SQLSTATE: HY000
Message: The table '%s.%s' does not have the necessary key(s) defined on it. Please check the table definition and create index(s) accordingly.
ER_MISSING_KEY was added in 5.6.40.
Error number: 1887; Symbol: WARN_NAMED_PIPE_ACCESS_EVERYONE; SQLSTATE: HY000
Message: Setting named_pipe_full_access_group='%s' is insecure. Consider using a Windows group with fewer members.
WARN_NAMED_PIPE_ACCESS_EVERYONE was added in 5.6.45.
Error number: 1888; Symbol: ER_FOUND_MISSING_GTIDS; SQLSTATE: HY000
Message: Cannot replicate to server with server_uuid='%s' because the present server has purged required binary logs. The connecting server needs to replicate the missing transactions from elsewhere, or be replaced by a new server created from a more recent backup. To prevent this error in the future, consider increasing the binary log expiration period on the present server. %s.

Abul成长之路

Comments